TP-Link Tapo A200 Solar Panel, 4.5 W Max Charging, Micro USB, 4 m Cable

TP-Link Tapo Solar Panel (Tapo A200) - 1 Year Local Warranty

The Tapo A200 is the larger of TP-Link's two Tapo solar panels. It measures 237.96 x 174.85 x 17.5 mm, outputs over a fixed 4 m Micro USB charging cable, and is published at a maximum charging voltage of 5.2 V and a maximum charging power of 4.5 W. IP65 rated with a 360° adjustable wall-mount bracket, it keeps one battery camera topped up from daylight alone. Its published camera list differs from the smaller A201's — check yours below.

The Bigger Panel, With a Micro USB Output

Two Tapo solar panels exist and they are not interchangeable. The A200 is the larger one at 237.96 x 174.85 x 17.5 mm (9.37 x 6.88 x 0.69 in), and it terminates in a Micro USB output on a single fixed 4 m cable, so it plugs straight into a Micro USB camera with no adapter. The smaller A201 is 173.42 x 120.42 x 15.7 mm with a Type-C output and a shorter base cable plus an extension. Panel area is why the A200 is published at the higher charging figure of the pair.

5.2 V Maximum, 4.5 W Maximum Charging Power

TP-Link publishes a maximum charging voltage of 5.2 V for the A200 and a maximum charging power of 4.5 W. The same 4.5 W figure is repeated as the maximum power output in TP-Link's Hardware Features table, so the two tables agree. That is roughly double the 2.5 W TP-Link publishes for the A201, so the A200 is the panel to specify where a camera sees heavy daily triggering or sits in partial shade. TP-Link footnotes that actual charging power may vary with installation location, weather conditions, temperature and other environmental factors.

One Panel, One Camera

TP-Link states plainly that a solar panel can only connect to one camera. There is no splitter and no daisy chain, so a three-camera installation needs three panels. Plan siting per camera: each panel needs its own patch of direct sun and its own 4 m run back to the camera. TP-Link publishes a reference figure of 30 minutes of sunlight per day to sustain a camera, tied to laboratory conditions and a specified workload.

IP65 and a 360° Bracket for Singapore Weather

The A200 is IP65 rated against dust and water jets, which is the right level for a panel mounted on an exposed wall through a Singapore monsoon. TP-Link publishes a 360° adjustable mounting bracket, so the panel can be angled to catch the best of the available sun wherever it is fixed. Mounting is wall-mounted, and TP-Link's published package contents include two slide waterproof gaskets, three mounting anchors, three mounting screws and a mounting template. Published operating range is -20 to 45 C, storage -40 to 60 C, at 10 to 90 percent relative humidity, non-condensing.

What the Panel Does Not Do

The A200 trickle-charges the camera's battery; it does not replace the battery, and the camera still needs its internal pack or a Tapo A100 fitted. It is a power accessory with no network connection, so it does not appear in the Tapo app as a device of its own and it has no bearing on recording, storage or voice control — those remain functions of the camera. TP-Link publishes certification as CE, FCC, RoHS and RCM, and publishes no net weight for this panel, so no weight is quoted here.

Ideal For

Singapore homes and small premises running a Tapo C400, C420 or C425 on an exposed wall, balcony, gate post or rooftop where there is real daylight and no convenient socket — and where the owner is tired of bringing the camera down to charge. Specify the A200 over the A201 when the camera has a Micro USB port, when the panel can sit up to 4 m away, or when the site is partly shaded and the extra output is worth having. Supplied by SourceIT with local Singapore warranty, GST invoice and project pricing on request.