TP-Link Tapo RVA400 Robot Vacuum Magnetic Boundary Strip
PRODUCT DESCRIPTION
TP-Link Tapo Robot Vacuum Magnetic Boundary Strip (RVA400) - Local Warranty
Two magnetic tapes of 2 m / 6.6 ft each, plus 3M adhesive, listed by TP-Link for the Tapo RV10 Plus, RV10 and RV10 Lite. TP-Link's own line on it is the plain one: "Simply set up areas you don't want the robot to go with the magnetic strip." Nothing to power, nothing to pair. Supplied by SourceIT with a GST invoice and local warranty.
A Boundary You Lay Down, Not One You Configure
TP-Link describes the RVA400 as a magnetic strip you use to set up areas you do not want the robot to go. It is a physical accessory rather than a software feature, so there is no setting to find in an app and nothing to re-enter if the robot is re-onboarded or the app is reinstalled. TP-Link publishes no app function, no setup step and no configuration for it, and none is claimed here - what is in the box is tape and adhesive, and where you put them is the whole of the setup.
The Places Worth Fencing Off
Pet bowls and litter trays, a run of cables behind a desk, a child's floor play area, a rug with a fringe that tangles a brush, or an open doorway to a room you would rather the robot left alone. TP-Link supplies two tapes of 2 m / 6.6 ft each, so one pack covers several of these at once, or a single wide threshold with length to spare. Decide where the robot should not go, mark it once, and stop thinking about it.
3M Adhesive Supplied in the Pack
TP-Link's published package contents for the RVA400 are two 2 m / 6.6 ft magnetic tapes and 3M adhesive, so the means of fixing the tapes to the floor comes in the box. TP-Link publishes no instruction on cutting or trimming the tape, so we do not advise doing so - plan each run to use a full 2 m length, or route the surplus along a skirting board rather than shortening it. Beyond the contents line, TP-Link publishes no width, thickness or material for the tape, and none is claimed here.
Genuine TP-Link Accessory
This is TP-Link's own boundary strip for the Tapo platform, published by TP-Link for the Tapo RV10 Plus, Tapo RV10 and Tapo RV10 Lite. Buying the listed accessory means fitting the part TP-Link publishes for those robots rather than a substitute tape of unknown specification. SourceIT supplies it as genuine TP-Link stock with a GST invoice and local warranty. If your robot is not one of the three models TP-Link names, ask us before ordering rather than assuming the strip is intended for it.
Ideal For
Singapore homes running a Tapo RV10 Plus, RV10 or RV10 Lite that need a physical keep-out zone — pet corners, cable runs, play areas and doorways. Supplied by SourceIT with GST invoice.
Tapo RVA400 Datasheet — Technical Specifications
General
| Model | Tapo RVA400 |
| Official Product Name | Tapo Robot Vacuum Magnetic Boundary Strip |
| Brand | TP-Link Tapo |
| Product Type | Robot vacuum accessory |
| Warranty | Local Warranty (Singapore) |
Specifications
| Tape Length | 2 m / 6.6 ft per tape |
| Quantity in Pack | Magnetic Tape x2 |
| Mounting | 3M Adhesive, supplied |
Everything stated on this page is taken from TP-Link's official Tapo RVA400 product page for Singapore (tp-link.com/sg); nothing beyond what TP-Link publishes there is claimed here.
TP-Link does not publish a specification table, width, thickness, material or weight for the Tapo RVA400, so none is claimed here. The tape length and the 3M adhesive are taken from TP-Link's published package-contents line and not from a specification table. TP-Link's replacement-warranty policy names no separate tier for robot vacuum accessories, so this listing states local warranty without a duration — ask us for the current coverage before ordering.
Compatibility & Software Support
TP-Link lists the RVA400 as compatible with the Tapo robot vacuums below, in this order. Check your model before ordering.
| Tapo RV10 Plus | Compatible |
| Tapo RV10 | Compatible |
| Tapo RV10 Lite | Compatible |
| Software | None required — physical accessory, no app setup |
TP-Link lists no other Tapo robot vacuum for the RVA400 — not the Tapo RV30, not the Tapo RV30 Plus and not the Tapo RV20 series — so no compatibility with any of those is claimed here. Ask us before ordering if your robot is not on this list.
Package Contents & Ordering Information
Package Contents
| Included Items | 2 m / 6.6 ft Magnetic Tape x2, 3M Adhesive |
Package contents are reproduced as TP-Link publishes them for the Tapo RVA400; nothing has been derived or added.
Ordering Information
| SourceIT SKU | Tapo RVA400 |
| Model | Tapo RVA400 |
| Warranty | Local Warranty (Singapore) |
| Related Consumables | Tapo RVA100 Replacement Kit; Tapo RVA300 Washable Mop Cloth; Tapo RVA200 Disposable Dust Bag |
Datasheet & Downloads
Frequently Asked Questions — Tapo RVA400
How much tape is in the pack?
Two magnetic tapes of 2 m / 6.6 ft each, plus 3M adhesive for fixing them down.
Which robots does it work with?
TP-Link lists the Tapo RV10 Plus, Tapo RV10 and Tapo RV10 Lite, and no other model.
Will it work with my Tapo RV30 or RV20 series robot?
TP-Link does not list the RVA400 for those models, so we do not claim it for them. Ask us before ordering if you run a Tapo robot that is not on the compatibility list above.
Can it be cut to length or curved?
TP-Link publishes no instruction on cutting or trimming the tape, so we do not advise doing so. Plan each run around a full 2 m length.
Does it need batteries or setup?
No. It is a passive magnetic accessory with no battery and no app setup. TP-Link's own line is that you "simply set up areas you don't want the robot to go with the magnetic strip."
We Also Recommend
