APC Smart-UPS SRT 72V 2.2kVA RM Battery Pack
PRODUCT DESCRIPTION
APC Smart-UPS SRT 72V 2.2kVA RM Battery Pack (SRT72RMBP) - 2 Years Local Warranty
Extended Runtime for APC Smart-UPS SRT 2.2 kVA models (SRT2200XLx / SRT2200RMXLx)
The APC APC Smart-UPS SRT 72V 2.2kVA RM Battery Pack (SRT72RMBP) is an external battery pack for the APC Smart-UPS On-Line SRT range. It connects to the UPS 72V DC battery bus and extends how long the protected load stays up during a mains failure — the difference between a graceful shutdown and a rack full of servers dropping mid-write. APC's installation guide confirms this pack is used with Smart-UPS SRT 2.2 kVA models (SRT2200XLx / SRT2200RMXLx). It is a runtime accessory, not a standalone power source: it has no outlets of its own and must be connected to a compatible SRT UPS.
Connect Up To Ten Packs on One UPS
APC states that the UPS will recognise as many as ten external battery packs. Runtime scales close to linearly with each pack added, so a single SRT can be built out from minutes of autonomy to hours where a site has no generator. Bear in mind that recharge time increases with every pack added — a bank that has been fully discharged takes correspondingly longer to return to full capacity, which matters if your site sees repeated outages in a single storm.
User-Replaceable VRLA Battery Modules
The SRT72RMBP carries two sealed, maintenance-free, valve-regulated lead-acid (VRLA) battery modules that slide out on handles for replacement, and the replacement cartridge part number is APCRBC141. APC rates the batteries at two to five years of typical service life and recommends replacement at least every five years. In Singapore, ambient temperature is the dominant factor: a pack sitting in an unconditioned comms cupboard will not last as long as one in a cooled server room, so plan cartridge budget accordingly.
Rack-Mounted, 2U (85 mm), Rails Included
The SRT72RMBP is the rackmount build: it occupies 2U (85 mm) in a standard 19-inch cabinet and ships with rail kit and rack mounting brackets. Dimensions are 85 mm (H) x 432 mm (W) x 594 mm (D). Battery packs are heavy — mount them at the bottom of the cabinet, below the UPS, and check the cabinet's static load rating before stacking several. The SRT72BP tower variant is available where there is no rack.
Supplied Locally with GST Invoice
SourceIT supplies the SRT72RMBP from Singapore with a GST invoice and local warranty support. Ordering the battery pack together with the UPS is usually the sensible approach — it avoids a second delivery and a second rack visit, and lets the whole bank be commissioned and load-tested in one go.
APC SRT72RMBP Datasheet — Technical Specifications
General
| Part Number (SKU) | SRT72RMBP |
| Manufacturer Product Name | APC Smart-UPS SRT 72V 2.2kVA RM Battery Pack |
| Brand | APC by Schneider Electric |
| Product Type | External battery pack (extended runtime) for Smart-UPS On-Line SRT |
| Form Factor | Rackmount 2U |
| GTIN / UPC | 731304274231 |
Battery Specifications
| Nominal Battery Voltage | 72 V DC |
| Battery Type | Sealed, maintenance-free, valve-regulated lead-acid (VRLA) |
| Battery Modules | 2, user-replaceable |
| Replacement Battery Cartridge | APCRBC141 |
| Typical Service Life | 2 to 5 years; APC recommends replacement at least every 5 years |
| Maximum Packs per UPS | Up to 10 recognised by the UPS |
| Compatible UPS Models | Smart-UPS SRT 2.2 kVA models (SRT2200XLx / SRT2200RMXLx) |
Physical & Environmental
| Dimensions (H x W x D) | 85 mm (H) x 432 mm (W) x 594 mm (D) |
| Rack Height | 2U (85 mm) |
| Rail Kit / Brackets | Rail kit and rack mounting brackets included |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -15 to 45 °C |
| Operating Relative Humidity | 0 to 95%, non-condensing |
| Operating Altitude | 0 to 3,000 m (0 to 10,000 ft) |
| Ingress Protection | IP20 |
| Manufacturer Warranty | 3 years UPS electronics / 2 years battery (APC by Schneider Electric) |
| Local Warranty (Singapore) | 2 years, supplied and supported by SourceIT Pte Ltd |
Compatibility & Runtime
Which UPS models does the SRT72RMBP fit? APC's installation guide specifies this pack for Smart-UPS SRT 2.2 kVA models (SRT2200XLx / SRT2200RMXLx). In the SourceIT catalogue that is:
| SRT2200XLI | 2,200 VA / 1,980 W · Tower |
| SRT2200RMXLI | 2,200 VA / 1,980 W · Rackmount 2U |
It will not work with SRT units on a different battery bus voltage — the 3 kVA models use 96V (SRT96BP / SRT96RMBP) and the 5 kVA and larger models use 192V (SRT192BP family). Match the pack to the UPS battery voltage, not to the physical size of the cabinet.
How many can I connect? Up to ten packs are recognised by the UPS. Runtime scales with each pack added; so does recharge time.
Runtime. Actual runtime depends entirely on the connected load, on battery age and on ambient temperature, so no single figure applies. Schneider publishes per-model runtime tables with one to four packs connected in the SRT brochure linked in the Downloads section below.
Outlets. None. This is a battery pack, not a PDU — the load stays plugged into the UPS.
Rack fit. Occupies 2U (85 mm); dimensions 85 mm (H) x 432 mm (W) x 594 mm (D). Rail kit and brackets are in the box. Mount low in the cabinet and check the static load rating.
Package Contents & Smart-UPS SRT Ordering Information
In the box: Front bezel, ground cable, tie brackets and screws, rail kit and rack mounting brackets, battery cable connector screw, user documentation
Smart-UPS SRT external battery pack range
| SRT48BP | 48 V, SRT 1 kVA / 1.5 kVA · Tower |
| SRT48RMBP | 48 V, SRT 1 kVA / 1.5 kVA · Rackmount 2U |
| SRT72BP | 72 V, SRT 2.2 kVA · Tower |
| SRT72RMBP (this listing) | 72 V, SRT 2.2 kVA · Rackmount 2U |
| SRT96BP | 96 V, SRT 3 kVA · Tower |
| SRT96RMBP | 96 V, SRT 3 kVA · Rackmount 2U |
| SRT192BP | 192 V, SRT 5 kVA / 6 kVA · Tower |
| SRT192RMBP | 192 V, SRT 5 kVA / 6 kVA · Rackmount |
| SRT192BP2 | 192 V, SRT 8 kVA / 10 kVA · Tower |
| SRT192RMBP2 | 192 V, SRT 8 kVA / 10 kVA · Rackmount |
Compatible Smart-UPS SRT units at SourceIT
| SRT2200XLI | 2,200 VA / 1,980 W · Tower |
| SRT2200RMXLI | 2,200 VA / 1,980 W · Rackmount 2U |
Replacement battery cartridge
| APCRBC141 | Replacement battery cartridge for the SRT72RMBP |
Datasheet & Downloads
Schneider Electric Singapore product page — SRT72RMBP
Links open on Schneider Electric's official product and document pages.
Frequently Asked Questions — APC SRT72RMBP
Which APC UPS models does the SRT72RMBP work with?
APC specifies it for Smart-UPS SRT 2.2 kVA models (SRT2200XLx / SRT2200RMXLx). In our catalogue those are SRT2200XLI, SRT2200RMXLI. The pack connects to the UPS 72V DC battery bus — it is not interchangeable with the 96V or 192V packs used by the larger SRT units.
How much extra runtime will one pack give me?
That depends entirely on the load. Runtime roughly scales with the number of packs, but the starting point is your actual wattage draw, so a lightly loaded UPS gains far more minutes than a fully loaded one. Schneider's SRT brochure carries per-model runtime tables for one to four packs; the link is in the Downloads section above.
Can I connect more than one SRT72RMBP?
Yes — APC states the UPS will recognise as many as ten external battery packs. Remember that recharge time grows with the bank, and that the cabinet needs to carry the weight: battery packs are the heaviest thing in most racks.
Does the SRT72RMBP have outlets I can plug equipment into?
No. It is a battery pack only. All load equipment stays connected to the UPS; the pack simply extends how long the UPS inverter can keep running.
What replacement battery cartridge does it take, and can I fit it myself?
The SRT72RMBP uses the APCRBC141 cartridge. The modules are user-replaceable — the front bezel removes and the modules slide out on handles. APC rates typical service life at two to five years and recommends replacement at least every five years.
What is the difference between the SRT72RMBP and the SRT72BP?
Electrically they are the same 72V pack for the same UPS models. The difference is mechanical: the SRT72BP is the tower build with stabiliser hardware, the SRT72RMBP is the rackmount build with rail kit and brackets included. Order the one that matches how the UPS itself is installed.
Is the SRT72RMBP covered by warranty in Singapore?
Yes. Every APC SRT72RMBP sold by SourceIT comes with local Singapore warranty and a GST invoice; APC backs the SRT72RMBP with a 3 years UPS electronics / 2 years battery manufacturer warranty.
