APC Back-UPS 2200VA, 230V, AVR

General

Output

Input

Batteries & Runtime

Communications & Management

Physical & Environmental

Specifications we do not publish for this model

SourceIT lists only figures confirmed by Schneider Electric's own documentation for this exact part number. The following are deliberately absent rather than unknown to us:

• Input plug type — the data sheet gives the cord length but not the plug standard.
• Data line protection — sources disagree on whether this build carries an Ethernet protection port.
• Battery amp-hour capacity — not published for this model.
• Bundled shutdown software — the data sheet records this build as not USB compatible, so no software claim is made.

If a missing figure matters to your specification, ask us and we will confirm it with the distributor rather than guess.

What you can plug into it

The BX2200MI-MS provides 4 universal outlets, all battery-backed. Universal receptacles accept Singapore BS 1363 three-pin plugs as well as the common European and North American plug bodies, so a mixed desk of local kit and imported equipment plugs straight in without adaptors. Size the load in watts, not in the number of free sockets: this model is rated at 1200 W of real power and that figure, not the socket count, is the limit.

Surge protection is rated at 273 Joules. That covers the switching transients and lightning-season spikes that a Singapore office sees on a 230 V supply; it is not a substitute for a properly earthed circuit.

Runtime

Schneider publishes the following runtime for this model: 1 minute at 1200 W; 8 minutes 30 seconds at 600 W. Runtime depends entirely on how much load you actually connect — halving the load more than doubles the time you get. Treat these figures as the manufacturer's test points, not as a promise for your particular equipment.

Recharge from a full discharge takes about 8 hours, so a unit that has ridden out a long outage will not deliver full backup again immediately.

Battery replacement

The battery in this unit is user-replaceable and the correct APC replacement cartridge is APCRBC177. SourceIT does not currently hold that cartridge as a stocked line — ask us and we will quote it in. A sealed lead-acid battery in a Singapore office typically wants replacing every three to five years.

Management, software and monitoring

Schneider's specification for this build records the unit as not USB compatible, so there is no unattended-shutdown software supplied and no network management option. If you need a UPS that can shut a server down cleanly and be polled over the network, look at the APC Smart-UPS SMT or SMC ranges instead — we carry both and can compare them against your load.

Siting it

Footprint is 190 mm (H) x 140 mm (W) x 390 mm (D) at 12.3 kg, and the unit is rated for 0 to 40 °C ambient with a relative humidity range of 0 to 95 % non-condensing. It is a floor-standing or under-desk tower. Battery life is temperature-driven, so keep it out of direct sun and away from the warm side of a rack.

In the box

UPS unit, user manual.

APC Back-UPS BX range at SourceIT

Replacement battery cartridges

What this range does not take

The APC Back-UPS BX range is a self-contained UPS. It has no SmartSlot, no external battery pack option and no rail kit — the battery inside it is the only battery, and extending runtime means moving up the range or moving to an APC Smart-UPS. If you need a rack-mounted unit, an internal network management card or an external battery pack, ask us about the Smart-UPS SMT, SMC and SMX families instead.

• Schneider Electric product page for the BX2200MI-MS — official product identity, feature list and document library (Indonesia (no Singapore page is published for this model) site)
• APC Back-UPS BX Series 500/750/950/1200/1600/2200 VA — User Manual (SPD_BU-UM-990-6291_EN)

Each link above was checked and resolved at the time this page was written. Schneider's own canonical datasheet download path blocks automated retrieval, so we link the product page and document library entries that do open rather than a URL that will fail for you. If you need the PDF datasheet attached to a quotation or a tender submission, email us and we will send it.

How do I size the BX2200MI-MS — is VA or W the number that matters?

Watts. The BX2200MI-MS is rated 2200 VA apparent power and 1200 W real power, and it is the watt figure that limits what you can connect. Add up the wattage on the nameplates of everything you want backed up, then leave headroom — a UPS run at its ceiling gives you the shortest possible runtime and works its battery hardest. As a rule of thumb, aim to load it to about half its watt rating for comfortable backup.

How long will it run in a power cut?

Schneider publishes 1 minute at 1200 W; 8 minutes 30 seconds at 600 W for this model. Those are laboratory test points at fixed loads, not a guarantee for your equipment.

Runtime on any UPS of this class is measured in minutes, not hours. The purpose is to ride through the short dips and brief outages that are the common failure mode on Singapore's grid, and to give you time for a clean shutdown on a longer one — not to keep you working through an extended blackout. Tell us your actual load and we will size it with you.

What does the “-MS” suffix in BX2200MI-MS mean?

It identifies the ASEAN regional build, supplied with universal receptacles that accept Singapore BS 1363 plugs directly. It is a genuinely different build from the European “-GR” (Schuko), the UK “-UK” and the plain IEC-outlet variants of the same capacity — outlet types, cord and approvals differ, and specifications from those builds should not be read across to this one. SourceIT supplies the -MS build, which is the correct one for Singapore.

Does it produce a pure sine wave — will it run an active-PFC power supply?

No. This model's output on battery is a stepped approximation to a sinewave, not a pure sine wave. That is entirely normal for this class of UPS and it is fine for the vast majority of office equipment: desktop PCs with conventional power supplies, monitors, routers, switches, NAS boxes, POS terminals and phone systems.

It matters in one case. Some modern power supplies with active power factor correction — common in higher-end workstations, gaming PCs and some servers — can refuse to run or can shut down abruptly on a stepped or square waveform. If the equipment you are protecting has an active-PFC supply, choose a sine-wave UPS instead: the APC Smart-UPS SMT and SMC ranges are sine wave and we stock both. Ask us and we will check the specification of your PSU before you buy.

Which replacement battery does it take, and can I fit it myself?

The correct APC replacement cartridge is APCRBC177 — not a stocked SourceIT line, but we will quote it in. The battery is user-replaceable: the unit is designed to be opened and the cartridge swapped by the owner, with the UPS switched off and unplugged. Expect three to five years of service life in a Singapore environment; heat and humidity are what wear a sealed lead-acid battery out, so a unit living in an air-conditioned room lasts longer than one in a warm store cupboard.

Does it come with shutdown software or network monitoring?

No. Schneider's specification for this build records it as not USB compatible, so there is no data port, no unattended-shutdown software and no card slot for network management.

If you need a UPS that closes files and shuts a server down cleanly when the battery runs low, or that an IT team can poll over the network, that is what the APC Smart-UPS SMT, SMC and SMX ranges are for — every one of them has a USB or serial port and most take an APC Network Management Card. We carry the full range and can quote the nearest equivalent by wattage.

How does the BX2200MI-MS compare with the BX1600MI-MS?

The BX1600MI-MS is 1600 VA / 900 W with 4 universal outlets, against 2200 VA / 1200 W and 4 universal outlets on this unit. Within the APC Back-UPS BX range every model is line-interactive with AVR and surge protection — what changes as you go up the range is the watt rating, the socket count and the size of the battery, and therefore how long it holds up a given load. Check the waveform row on each listing as well, because it is not identical across the whole range. If your load is close to the ceiling of one model, buy the next one up: you gain runtime as well as headroom. See BX1600MI-MS for the full specification of that model.

Is the BX2200MI-MS covered by a local Singapore warranty?

Yes. Every APC BX2200MI-MS sold by SourceIT comes with local Singapore warranty and a GST invoice; APC backs the BX2200MI-MS with a 2-year manufacturer warranty.

Schneider states this range's warranty as two years repair or replace, with no separate European Community figure — so the two-year term above is the correct one for a unit bought and used in Singapore, and it is what we honour here.