Rising component costs may adjust prices on selected items without prior notice. Supply constraints may add shipping time — we’ll notify you if affected. OEM costs and supply tightening — contact us to secure stock and pricing. For projects or bulk orders, choose “Request for Quotation” on any item.
Call our specialists(65) 6978 3502 Email our sales teamsales@sourceit.com.sg

TP-Link Omada Pharos 2.4 GHz 300 Mbps 9 dBi Outdoor CPE 27 dBm

SKU: CPE210

Pricing available upon request

Email sales@sourceit.com.sg or use Request for Quotation below and our team will confirm the latest price, availability and lead time.

Shipping calculated at checkout.

PRODUCT DESCRIPTION

TP-Link Pharos 2.4GHz 300Mbps 9dBi Outdoor CPE (CPE210) - 5 Years Local Warranty

The CPE210 is the entry point to TP-Link's Pharos outdoor range: a 9 dBi dual-polarized directional MIMO antenna on 2.4 GHz, rated to 300 Mbps with transmit power adjustable to 27 dBm / 500 mW, and system-level optimizations TP-Link credits with more than 5 km of wireless transmission. It carries the same two-port PoE passthrough design and rugged ASA enclosure as the rest of the family.

9 dBi With a Wide 65° Beam for Shorter Hops

The built-in 9 dBi 2x2 dual-polarized directional antenna gives a 65° horizontal and 35° vertical pattern - the widest beam in the Pharos CPE line. That makes it quick to aim, tolerant of a pole that shifts slightly in the wind, and well suited to covering a spread of nearby buildings from a single base station. It is not the unit for a 20 km hop; it is the unit for a link across a yard, a campus or an estate where alignment time matters more than maximum reach.

2.4 GHz at 500 mW, Adjustable in 1 dBm Steps

Operating across 2.4-2.483 GHz with transmit power adjustable from 0 to 27 dBm / 500 mW, the CPE210 works the band that penetrates foliage and partial obstruction better than 5 GHz. Adjustability matters on a short link: dialling power down reduces self-interference and keeps neighbouring links clean, while the full budget is there when the path needs it. Deployment must respect the local regulatory limit for the band.

300 Mbps With Narrow-Channel Options

Wireless speeds reach 300 Mbps at 40 MHz, 144.4 Mbps at 20 MHz, 72.2 Mbps at 10 MHz and 36.1 Mbps at 5 MHz. The narrow channels are the practical tool for 2.4 GHz, which is the busiest band in any built-up area: halving the channel width raises the signal-to-noise margin and often produces a faster real-world link than a wide channel fighting for air. With MAXtream enabled the radio switches from 802.11b/g/n contention to TP-Link's proprietary TDMA scheduling, giving each station its own slot.

Two Ports, PoE Passthrough and a Grounding Terminal

LAN0 takes passive PoE in and LAN1 passes it through to a second device, so a camera on the same mast runs from the same injector and cable. A dedicated grounding terminal is fitted - essential for a rooftop radio in Singapore. Maximum power consumption is 10.5 W, and the supplied 24 V 1 A injector supports runs up to 60 m with a remote reset button so a stuck unit can be power-cycled from ground level.

ASA Enclosure, IPX5, 15 kV ESD and 6 kV Lightning Protection

The casing is outdoor ASA stabilized plastic - chosen for UV stability over years of exposure - with IPX5 waterproof certification, 15 kV ESD protection and 6 kV lightning protection. Operating range is -30 to 70 °C, storage -40 to 70 °C, humidity to 90% non-condensing. At 224 x 79 x 60 mm it is the same compact body as the CPE510, so mounting hardware and installation practice carry across.

Ideal For

Singapore campuses, worksites, warehouses and estates linking nearby buildings, CCTV and access-control backhaul from a gatehouse or car park, and small multipoint deployments where a wide beam beats maximum gain. TP-Link lists the CPE210 as End of Sale, so availability is limited - ask SourceIT about current stock and the current generation. Supplied by SourceIT with local Singapore warranty, GST invoice and project pricing on request.

CPE210 Datasheet — Technical Specifications

General

Model CPE210
Official Product Name 2.4GHz 300Mbps 9dBi Outdoor CPE
Brand TP-Link Pharos
Warranty 5 Years Local Warranty (Singapore)
Lifecycle Status End of Sale (as published by TP-Link)

Hardware

Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc
Memory 64 MB DDR2 RAM, 8 MB Flash
Interface 1× 10/100 Mbps Shielded Ethernet Port (LAN0, Passive PoE in); 1× 10/100 Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough); 1× Grounding Terminal; 1× Reset Button
Power Supply Passive Power over Ethernet via LAN0 (+4,5 pins; -7,8 pins), voltage range 16-27 V DC
Max. Power Consumption 10.5 W max
Antenna Built-in 9 dBi 2x2 dual-polarized directional antenna; beam width 65° (H-plane) / 35° (E-plane)
Dimensions (W x D x H) 224 × 79 × 60 mm
Protection 15 kV ESD protection, 6 kV lightning protection
Enclosure Outdoor ASA stabilized plastic; IPX5 waterproof certification

Wireless

Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled)
Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled)
Frequency 2.4-2.483 GHz
Wireless Speeds Up to 300 Mbps (40 MHz, dynamic); 144.4 Mbps (20 MHz); 72.2 Mbps (10 MHz); 36.1 Mbps (5 MHz)
Transmission Power 27 dBm / 500 mW (adjustable by 1 dBm)
Wireless Configuration Pharos MAXtream TDMA; 802.11b/g/n modes; selectable channel width 5/10/20/40 MHz; automatic channel selection; transmission power control; DFS; WDS enable/disable; WPA/WPA2 and WPA-PSK/WPA2-PSK (AES/TKIP), 64/128/152-bit WEP; SSID broadcast enable/disable; multi-SSID with VLAN tagging (AP mode only); distance/ACK timeout setting; wireless MAC address filter

Software

Management Discovery and remote management via Pharos Control application; HTTP/HTTPS web-based management; system log; SNMP agent (v2c); Ping Watch Dog; dynamic DDNS; SSH server
System Tools Signal strength / noise / transmit CCQ / CPU / memory indicators; throughput, stations, interfaces, ARP, routes, WAN and DHCP monitors; spectrum analyzer; speed test; ping; traceroute
Optimizations Optimized IGMP snooping / proxy for multicast applications; hardware watch dog

Supplied PoE Adapter

Dimensions (W x D x H) 110 × 57 × 33.5 mm
Interfaces 1× AC jack with earth ground; 1× 10/100/1000 Mbps shielded Ethernet port (power + data); 1× 10/100/1000 Mbps shielded Ethernet port (data)
Button Remote reset button
Power Status LEDs 0-0.8 A: green; 0.8-1.0 A: red
Input 100-240 VAC, 50/60 Hz
Output 24 VDC, 1.0 A max (+4,5 pins; -7,8 pins) — supports up to 60 m Power over Ethernet
Efficiency >80%
Adapter Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark

Environment & Certification

Operating Temperature -30 °C to 70 °C
Storage Temperature -40 °C to 70 °C
Operating Humidity 10% to 90% non-condensing
Storage Humidity 5% to 95% non-condensing
Certification CE, FCC, RoHS, IPX5

Transmit power must be set within the limit permitted for the 2.4 GHz band in the country of installation.

Compatibility & Software Support

The CPE210 is a Pharos-series outdoor CPE. It runs TP-Link's PharOS firmware and is managed through its own web interface or the free Pharos Control application - it is not an Omada device and cannot be adopted into an Omada Software, Hardware or Cloud-Based Controller, so it will not appear in an Omada site view alongside Omada gateways, switches and access points.

Omada Controller Not supported — the CPE210 runs PharOS and is not adopted by an Omada Controller
Pharos Control Supported — free centralised discovery and remote management of Pharos devices
Standalone Management Supported — HTTP/HTTPS web interface, SSH, SNMP v2c, system log
PoE Passthrough LAN1 passes passive PoE through to a second device on the same mast
Band 2.4 GHz only — it will not link to a 5 GHz CPE such as the CPE510, CPE605, CPE610 or CPE710

Both ends of a link must be on the same band. Tell us the two sites and the distance and we will confirm whether the CPE210 or the higher-gain CPE220 is the right choice before you order.

Package Contents & Ordering Information

Package Contents

Included Outdoor Wireless CPE; 24V 1A Passive PoE Adapter; Pole Mounting Straps; AC Power Cord; Installation Guide

Ordering Information

Model CPE210
EAN Not published by TP-Link
Carton Pack Size Not published by TP-Link
Availability End of Sale at TP-Link — ask SourceIT for current stock and lead time

A point-to-point link needs two units. Ask us to quote the pair with mounting and surge protection.

Datasheet & Downloads
Frequently Asked Questions — CPE210

How far will a CPE210 link go?

TP-Link cites system-level optimizations for more than 5 km. Real distance depends on clear line of sight, mounting height, alignment and the local noise floor — send us the two site locations and we will sanity-check the link before you commit.

How does it differ from the CPE220?

Antenna gain and power. The CPE210 is 9 dBi with a 65° beam at up to 27 dBm / 500 mW; the CPE220 is 12 dBi with a 60° beam at up to 30 dBm / 1000 mW. Both are 2.4 GHz, 300 Mbps, with PoE passthrough and a grounding terminal.

Can I manage it from my Omada Controller?

No. The CPE210 runs PharOS and is managed through its own web interface or the free Pharos Control application.

What warranty does SourceIT provide?

Five years local Singapore warranty — Pharos Outdoor CPE sits in TP-Link's five-year replacement tier. Every CPE210 sold by SourceIT comes with a GST invoice.

Can SourceIT quote this for a project or tender?

Yes. Send the bill of materials and we will quote the whole build — bridge pair, mounting, surge protection, switching and the Omada network behind it — with local warranty and support.


We Also Recommend