APC Easy UPS 1600VA Tower 230V 4 UNIVERSAL Outlets
PRODUCT DESCRIPTION
APC Easy UPS BVG 1600VA Tower, 230V, 4 Universal Outlets, AVR (BVG1600I-MSX) - 2 Years Local Warranty
APC BVG1600I-MSX — 1600 VA / 900 W Backup Power for Singapore Offices
The APC Easy UPS BVG1600I-MSX is a line-interactive tower UPS with automatic voltage regulation, rated 1600 VA / 900 W with four universal sockets. Its universal sockets take Singapore three-pin plugs on the way out, and it arrives with a moulded British three-pin plug on the way in, so it goes straight into a Singapore wall socket — no adapters, no travel kit. It is the current Easy UPS tower range and the one SourceIT recommends for new small-office and home-office installations.
230 V, 50 Hz Mains Protection Built for Singapore Conditions
Singapore's mains is nominally 230 V at 50 Hz and PUB's grid is among the most reliable anywhere, but reliable is not the same as clean. Lightning is frequent, lifts and chillers starting on the same riser pull the voltage down, and older buildings sag noticeably at the far end of a long run. The BVG1600I-MSX's automatic voltage regulation corrects those conditions electronically and keeps the output within tolerance without switching to battery, so the battery is preserved for genuine outages. When the supply does fail, transfer happens in 6 ms typical, 10 ms maximum — far quicker than a computer power supply can notice.
Surge Protection and Equipment Safety
The BVG1600I-MSX carries a surge energy rating of 156 Joules, absorbing the transients that follow a nearby lightning strike or a large motor switching on the same circuit. Surge damage is cumulative and usually silent — equipment does not fail on the day, it fails months later — which is why the protection is worth having on equipment you would rather not replace.
User-Replaceable Battery and Humidity Considerations
The BVG1600I-MSX runs from a maintenance-free sealed lead-acid battery that you can replace yourself when it reaches the end of its life. Battery life in Singapore is genuinely shorter than in temperate markets: sustained heat and humidity accelerate the chemistry, and a unit kept in an un-airconditioned store room or a closed cabinet will age faster than one on an open desk. Giving the vents clear air is the single most effective thing you can do to get full service life out of it, and treating the cartridge as a scheduled consumable rather than waiting for a failure is the difference between a planned five-minute swap and an unprotected server room.
Where This Model Fits — SME Office, Home Office and Comms Cabinet
At 900 W of usable output across four universal sockets, the BVG1600I-MSX suits a desktop and monitor, a router and ONT, a small NAS, a point-of-sale terminal or the network gear at the bottom of a comms cabinet. It is a tower unit, not a rack product, and there is no rail kit for it. If your requirement involves a rack, a server with an active-PFC power supply, SNMP monitoring or extended runtime, that is Smart-UPS territory and SourceIT will point you at the right SMC, SMT or SMX model instead of overselling this one. Everything we supply comes with local Singapore warranty and a GST invoice.
APC BVG1600I-MSX Datasheet — Technical Specifications
General
| Part Number (SKU) | BVG1600I-MSX |
| Schneider Electric Product Name | APC Easy UPS 1600VA, Tower, 230V, 4 UNIVERSAL Outlets, AVR |
| Series | Easy UPS BVG |
| Topology | Line interactive |
| Form Factor | Tower |
| Automatic Voltage Regulation (AVR) | Yes |
| Status Display | LED status display plus audible alarms |
| Cooling | Fan cooled; the fan runs on battery and while charging (on/off, not variable speed) |
| Ingress Protection | IP20, indoor use only |
| Warranty | 2-Year Manufacturer Warranty (APC by Schneider Electric) |
| Local Warranty (Singapore) | Supplied by SourceIT Pte Ltd with GST invoice |
Output
| Output Power Capacity | 1600 VA / 900 W |
| Nominal Output Voltage | 230 V AC, single phase |
| Output Frequency | 50/60 Hz ±5 Hz |
| Output Waveform | Stepped approximation to a sine wave |
| Transfer Time | 6 ms typical, 10 ms maximum |
| Output Connections | 4 × universal sockets |
| Surge Energy Rating | 156 Joules |
Input
| Nominal Input Voltage | 220–240 V AC, single phase |
| Input Frequency | 50/60 Hz |
| Input Connection | British 3-pin (BS 1363) plug, rated 7.9 A |
| Input Protection | Resettable circuit breaker |
Batteries & Runtime
| Battery Type | Maintenance-free sealed lead-acid (VRLA), internal and included; 3–5 year design life |
| Battery Replacement | User-replaceable |
Physical & Environmental
| Dimensions | 182 × 130 × 320 mm (H × W × D) |
| Net Weight | 9.7 kg |
| Operating Temperature | 0–40 °C |
| Operating Relative Humidity | 0–95% non-condensing |
| Audible Noise | Under 45 dBA |
Every figure in these tables is taken from Schneider Electric's published documentation for this exact part number. Where Schneider does not publish a value, or where two of its own documents disagree, the row is left out rather than estimated — ask SourceIT and we will confirm it with the distributor.
Schneider Electric publishes the BVG range's characteristics through its product records and installation documentation rather than a downloadable per-model data sheet. Figures above are the ones carried consistently across those sources; runtime at load is not published in a self-consistent form for any BVG model and is therefore not quoted anywhere on this page.
Compatibility & Runtime
What you can plug in
The BVG1600I-MSX provides 4 × universal sockets. Its usable output is 900 watts — that is the number to size against, not the 1600 VA headline. Add up the wattage of everything you intend to protect and keep the total comfortably below 900 W so the unit is not running at its limit every day.
The universal sockets accept Singapore three-pin BS 1363 plugs as well as the common two-pin styles, so a desktop, monitor, router and NAS can be connected without adapters or a trailing extension block.
Runtime
Schneider Electric does not publish a self-consistent runtime table for the BVG range, so SourceIT does not quote one. The figures circulating on third-party sites contradict each other and in places are physically impossible, and we would rather say nothing than repeat them. What the design is for is clear enough: riding through the brief dips and short cuts that Singapore's grid produces, and giving you time to save work and shut down cleanly. Tell us your load in watts and we will get a runtime figure confirmed by the distributor before you order.
Battery and replacement cartridge
Schneider Electric does not publish an APC replacement battery cartridge part number for the BVG range, so SourceIT does not name one here — quoting the wrong cartridge is the single most common cause of a returned battery. The internal battery is a sealed lead-acid type with a 3 to 5 year design life. When the time comes, contact SourceIT with your unit's serial number and we will confirm the correct part with the distributor.
Management and monitoring
Schneider Electric does not publish a communications or management specification for this model, so SourceIT makes no claim about USB signalling or shutdown software here, and no SmartSlot bay or network management card option is listed for the range. If you need SNMP monitoring or scripted shutdown across several machines, the Smart-UPS SMC and SMT ranges are the right place to look and we can quote them.
Siting it
This is a tower unit measuring 182 × 130 × 320 mm (H × W × D), weighing 9.7 kg, and it is rated for 0 to 40 °C. It is designed to stand on or under a desk, on a shelf, or on the floor of a comms cabinet — it is not a rack-mount product and no rail kit is available for it. Leave clear air around the vents; an enclosed cupboard in an un-airconditioned room will shorten the battery's life more than anything else you can do to it.
Package Contents & Easy UPS BVG Ordering Information
In the box
Schneider Electric does not publish a package-contents list for this part number, so SourceIT does not print one here. The UPS ships with its user documentation; if you need to know exactly which cables are included before you order, ask us and we will confirm with the distributor.
Easy UPS BVG series — ordering information
| BVG700I-MSX | 700 VA / 360 W — 2 × universal |
| BVG1200I-MSX | 1200 VA / 650 W — 4 × universal |
| BVG1600I-MSX (this listing) | 1600 VA / 900 W — 4 × universal |
| BVG2200I-MSX | 2200 VA / 1200 W — 4 × universal |
The BVG range steps from 700 VA to 2200 VA on a common design. The 700 and 1200 are convection cooled and silent; the 1600 and 2200 carry a cooling fan, which is worth knowing if the unit is going to sit on a desk beside someone.
Replacement battery cartridges
Schneider Electric does not publish a cartridge part number for the BVG range. Contact SourceIT with your unit's serial number when the battery needs replacing and we will confirm the correct part before you order.
Related equipment
These are standalone tower units, and Schneider Electric lists no rail kit, external battery pack or network management card option for any of them. If your requirement has grown past that — rack mounting, SNMP monitoring, extended runtime, or a pure sine wave output for an active-PFC server power supply — the APC Smart-UPS SMC, SMT and SMX ranges are the step up, and SourceIT stocks them with the same local warranty and GST invoicing.
Datasheet & Downloads
Schneider Electric product page for the BVG1600I-MSX — the official product record. This is the Singapore record.
- APC Easy UPS BVG User Guide, 600–2200 VA (Schneider Electric, SPD_BU-UM-TME58200_EN)
- APC Easy UPS BVG Quick Installation Guide (Schneider Electric, SPD_BU-QIG-TME65185_ML)
- APC Easy UPS BVG Series Brochure, 600–2200 VA (Schneider Electric)
Each link above was checked and resolves at the time of writing. Schneider Electric hosts its documents through a redirect service that sometimes serves a different model's file; where that happened during our checks we have linked the document record page instead of the direct PDF, so you always land on the correct document for this product. If you need a copy of the data sheet for a tender submission, email SourceIT and we will send the current revision.
Frequently Asked Questions — APC BVG1600I-MSX
What is the difference between 1600 VA and 900 W, and which should I size against?
Size against the watts. VA is apparent power and W is real power; for this class of UPS the watt figure is the honest ceiling on what you can actually run. The BVG1600I-MSX is rated 1600 VA / 900 W. Add up the wattage on the labels or power supplies of everything you want to protect and keep the total below 900 W with room to spare. A modern desktop and monitor typically draw well under 200 W together, but a laser printer can spike far higher, which is one reason printers should not be on a UPS at all.
How long will it run during a power cut?
It depends entirely on your load. Schneider Electric does not publish a self-consistent runtime table for the BVG range, so SourceIT does not quote one here — tell us your load in watts and we will get a figure confirmed by the distributor. In practice a UPS of this size is bought to ride out the brief dips and momentary cuts that come with thunderstorms on the Singapore grid, and to give you a few minutes to save your work and shut down properly — not to keep working through a long outage.
What does the "-MSX" suffix mean?
It denotes the ASEAN build of the Easy UPS BVG, fitted with universal sockets that accept Singapore three-pin BS 1363 plugs directly. It is a genuinely different build from the IEC-outlet versions sold in other regions, not a relabelling, so specifications should not be read across from a non-MSX part number.
Is the output a pure sine wave? Will it work with an active-PFC power supply?
No — the BVG1600I-MSX produces a stepped approximation to a sine wave on battery, which is what Schneider Electric's documentation states for this model. That is entirely normal for this class of UPS and it is fine for the great majority of desktops, monitors, routers, modems, NAS boxes and point-of-sale terminals. It is worth knowing, though, that some high-efficiency power supplies with active power factor correction — typically in servers and higher-end workstations — can be fussy about a stepped waveform and may shut down or refuse to transfer. If you are protecting a server or an active-PFC workstation, ask SourceIT about the APC Smart-UPS SMC or SMT range, which produces a true sine wave output.
Which replacement battery does it take, and can I change it myself?
The battery is a sealed lead-acid type with a 3 to 5 year design life, but Schneider Electric does not publish an APC cartridge part number for the BVG range, so we will not guess at one here — ordering the wrong cartridge is the most common cause of a returned battery. Contact SourceIT with your unit's serial number and we will confirm the right part with the distributor.
How does this compare with the other Easy UPS BVG models?
All four BVG models share the same line-interactive design with AVR, the same stepped-approximation output and the same 156 Joule surge rating; what changes is capacity, socket count and cooling. This one is 1600 VA / 900 W with 4 × universal. The 700 and 1200 VA models are convection cooled and run silent; the 1600 and 2200 VA models have a cooling fan. Compare the range: BVG700I-MSX, BVG1200I-MSX, BVG2200I-MSX.
Is this suitable for a server?
A UPS in this class is designed for desktops, monitors, routers, modems, NAS boxes, point-of-sale terminals and small office equipment. It is not the right protection for a production server: there is no network management card option, no SmartSlot, no extended-runtime battery pack, and the output is a stepped approximation rather than a true sine wave, which some server power supplies will not accept. For a server, a comms cabinet or anything in a rack, ask SourceIT about the APC Smart-UPS SMC, SMT and SMX ranges.
Does it come with a Singapore warranty and a GST invoice?
Yes. Every APC BVG1600I-MSX sold by SourceIT comes with local Singapore warranty and a GST invoice; APC backs the BVG1600I-MSX with a 2-year manufacturer warranty.
