TP-Link Omada BE11000 Wall Plate Tri-Band Wi-Fi 7 Access Point with PoE Out
Email sales@sourceit.com.sg or use Request for Quotation below and our team will confirm the latest price, availability and lead time.
PRODUCT DESCRIPTION
TP-Link Omada BE11000 Wall Plate Tri-Band Wi-Fi 7 Access Point with PoE Out (EAP775-Wall) - 5 Years Local Warranty
The EAP775-Wall is Omada's BE11000 tri-band Wi-Fi 7 wall-plate access point. It mounts flush over a standard wall box, delivers 6-stream Wi-Fi 7 across 6 GHz, 5 GHz and 2.4 GHz, and adds four wired downlinks — one 2.5G and three Gigabit — with PoE out, so a hotel room, dormitory or classroom gets in-room Wi-Fi 7 plus wired ports for a TV, IP phone or camera from a single cable.
6-Stream Tri-Band Wi-Fi 7
TP-Link rates the EAP775-Wall at 5765 Mbps on 6 GHz, 4324 Mbps on 5 GHz and 688 Mbps on 2.4 GHz. The 6 GHz radio supports 320 MHz channels and gives Wi-Fi 7 and 6E clients clean spectrum away from legacy devices, while MLO, Multi-RUs and 4K-QAM reduce latency and interference. Omada rates it for 380+ concurrent clients over about 100 m² (1050 ft²) — sized for a room or small suite rather than an open floor.
Five Ethernet Ports with Flexible PoE Out
The uplink is a 2.5G Ethernet port; on the room side there is a 2.5G downlink plus three Gigabit ports. Downlink PoE is flexible — dual PoE or a single PoE+ output, up to 25 W — and requires an 802.3bt input. The datasheet specifies the output as one 802.3at PoE+ port at 25.4 W or two 802.3af ports, which is enough to power an IP phone or a small camera without a separate injector.
Slim Wall-Mounted Design with Paintable Cover
The 172.9 × 91.2 × 41.3 mm unit sits flush on the wall, and TP-Link includes a paintable cover so it can be finished to match the room. TP-Link notes that painted covers cannot be returned or repaired.
Concealed Anti-Theft Lock
A concealed physical security lock secures the AP flush to its mount — useful in hotel rooms, student accommodation and public areas where wall-mounted equipment is within reach.
One-Click Setup with Omada SDN
Adopted into Omada Central (cloud), a hardware controller or the software controller, the EAP775-Wall supports zero-touch provisioning, multi-site management, captive portals and seamless roaming, and is managed alongside Omada switches and gateways. 24 SSIDs, WPA3-Personal/Enterprise, MAC filtering and rogue AP detection handle guest and staff segmentation.
Ideal For
Singapore hotels, serviced apartments, student hostels, hospital wards and classrooms that need in-room tri-band Wi-Fi 7 plus wired ports for TVs, phones or cameras over one existing cable run. Supplied by SourceIT with local Singapore warranty, GST invoice and project pricing on request.
EAP775-Wall Datasheet — Technical Specifications
General
| Model | EAP775-Wall |
| Official Product Name | BE11000 Wall Plate Wi-Fi 7 Access Point |
| Brand | TP-Link Omada |
| Warranty | 5 Years Local Warranty (Singapore) |
Hardware Features
| Interface | Uplink: 1× 2.5G Ethernet Port; Downlink: 1× 2.5G Ethernet Port + 3× Gigabit Ports (flexible PoE Out requiring 802.3bt input) |
| Physical Security Lock | Yes |
| Button | Reset |
| Power Supply | 802.3at/bt PoE (product page); 802.3bt PoE++ 42.5–57 V/1.2 A input (datasheet) |
| PoE Out | Flexible dual PoE or single PoE+ output; datasheet: 1× 802.3at PoE+ (25.4 W) or 2× 802.3af PoE |
| Max. Power Consumption | 45 W (with 25 W PoE Out) |
| Dimensions | 6.8 × 3.6 × 1.6 in (172.9 × 91.2 × 41.3 mm) |
| Weight | 0.48 kg (1.06 lb); mounting bracket 0.15 kg (0.33 lb) (datasheet) |
| Antenna | 6× Internal (2.4 GHz: 2× 5 dBi; 5 GHz: 2× 5.5 dBi; 6 GHz: 2× 5.5 dBi) |
| Bluetooth | V5.2 |
| Mounting | Wall Mounting (Kits included) |
TP-Link's product page lists the power input as 802.3at/bt PoE, while the datasheet specifies an 802.3bt PoE++ input and both state that PoE Out requires an 802.3bt input. Plan on an 802.3bt switch port if downlink PoE will be used.
Wireless Features
| Coverage | 1050 ft² (100 m²) |
| Concurrent Clients | 380+ |
| Wireless Standards | IEEE 802.11 a/b/g/n/ac/ax/be |
| Frequency | 2.4 GHz, 5 GHz, 6 GHz |
| Signal Rate | 6 GHz: 5765 Mbps; 5 GHz: 4324 Mbps; 2.4 GHz: 688 Mbps |
| Wireless Functions | MLO, 4K-QAM, Multi-RUs, 320 MHz Bandwidth, 24 SSIDs, Seamless Roaming, Beamforming, QoS, Rate Limiting, Load Balancing, Airtime Fairness, Band Steering |
| Wireless Security | Captive Portal, Access Control, MAC Filtering, WPA3-Personal/Enterprise, Rogue AP Detection |
| Transmission Power | 4–22 dBm across all bands |
Management Features
| Omada App | Yes |
| Centralized Management | Omada Hardware / Software / Cloud-Based Controllers |
| Cloud Access | Yes (requires Omada Controller) |
| Zero-Touch Provisioning | Yes (requires Omada controller) |
| Other | Email Alerts, LED On/Off Control, SNMP v1/v2c/v3, SSH, Web-based Management, Multi-site Management |
Environment & Certification
| Operating Temperature | 0–40 °C (32–104 °F) |
| Storage Temperature | -40–70 °C (-40–158 °F) |
| Operating Humidity | 10–90% RH non-condensing |
| Storage Humidity | 5–90% RH non-condensing |
| Certification | Product page: FCC. Datasheet: Wi-Fi 7 (R1), Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3; FCC/CE/NCC/VCCI/JRF/BSMI |
| System Requirements | Windows XP/Vista/7/8/10/11, Linux |
Compatibility & Software Support
The EAP775-Wall is part of the Omada ecosystem: gateways, switches and access points are managed together from one controller, under one set of policies, with one view of the network. Seamless Roaming, Captive Portal, Cloud Access and Zero-Touch Provisioning require an Omada SDN controller.
| Omada SDN Controller | Supported — Omada Hardware, Software or Cloud-Based Controller |
| Omada App | Supported — remote management from iOS and Android |
| Omada Cloud Access | Supported — requires an Omada controller |
| Standalone Mode | Supported — web-based management |
| Client Requirements | MLO, 4K-QAM, Multi-RUs and 320 MHz require Wi-Fi 7 clients that support them |
Package Contents & Ordering Information
What’s in the Box
| Package Contents | EAP775-Wall, Paintable Cover, Installation Guide, Mounting Kits |
| Power Adapter | Not listed — the EAP775-Wall is PoE-powered |
Ordering Information
| Model | EAP775-Wall |
| Recommended Retail Price (incl. GST) | S$409.00 |
Datasheet & Downloads
Frequently Asked Questions — EAP775-Wall
Does the EAP775-Wall need an Omada Controller?
No. It can be managed standalone through its web interface. Adopting it into an Omada Hardware, Software or Cloud-Based Controller unlocks central configuration, zero-touch provisioning, seamless roaming, captive portals and cloud/app access.
What PoE does it need?
For full function including PoE out on the downlink ports, an 802.3bt PoE++ switch port. The product page also lists 802.3at input.
What warranty does SourceIT provide?
Five years local Singapore warranty. Every EAP775-Wall sold by SourceIT comes with a GST invoice.
Is stock held locally?
SourceIT holds fast-moving Omada lines in Singapore. Anything not in local stock is brought in on indent — ask us for the current lead time before committing to a project date.
Is this model available for project orders?
Yes. TP-Link supplies this model for project deployments; contact SourceIT with your bill of materials for pricing and lead time.
We Also Recommend





