TP-Link Omada BE11000 Ceiling Mount Tri-Band Wi-Fi 7 Access Point with 10G PoE+ Uplink

TP-Link Omada BE11000 Ceiling Mount Tri-Band Wi-Fi 7 Access Point (EAP773) - 5 Years Local Warranty

The EAP773 is Omada's BE11000 tri-band Wi-Fi 7 ceiling access point with a 10G uplink. It pairs a 6 GHz radio, Multi-Link Operation and 320 MHz channels with a single 10G Ethernet port, so a slim 32.5 mm chassis can be deployed on standard 802.3at PoE without the wired side capping what the radios can deliver.

Tri-Band Wi-Fi 7 With a 6 GHz Radio for Modern Clients

The EAP773 runs three radios at once: 5760 Mbps on 6 GHz, 4320 Mbps on 5 GHz and 574 Mbps on 2.4 GHz. The 6 GHz band is the reason to choose tri-band — it is clean spectrum that legacy clients cannot occupy, and it carries 320 MHz channels for peak throughput. Meanwhile 2.4 GHz stays available for older devices, printers, sensors and building-services kit, so a single AP covers the whole client mix in an office or classroom.

A 10G Port Means the Uplink Is Never the Limit

Where most access points in this class stop at 1G or 2.5G, the EAP773 uses a single 10G Ethernet port. One cable carries both the multi-gigabit uplink and 802.3at PoE power, and the AP draws 25.44 W over PoE or 22.57 W on 12V/2.5A DC. For a buyer planning a multi-gigabit refresh, that headroom is what makes the cabling and switch investment last — the AP will not need replacing when client density rises.

Multi-Link Operation and 4K-QAM Cut Latency, Not Just Add Speed

Multi-Link Operation lets a Wi-Fi 7 client transmit across the 6 GHz, 5 GHz and 2.4 GHz links simultaneously, moving traffic off a link that has become congested instead of waiting on it. 4K-QAM raises the modulation ceiling to 12 bits per symbol for clients with a strong, clean signal. Add OFDMA, BSS Coloring, band steering and airtime fairness, and the practical result is steadier latency and less jitter for voice and video calls when the room fills up.

Seamless Roaming and Mesh Across the Site

With a controller in place the EAP773 supports 802.11k/v/r seamless roaming, so a user walking between rooms hands off between APs without dropping a call, and Omada Mesh, which lets an AP join wirelessly where running a cable is impractical — across a courtyard, into a heritage building, or in a temporary fit-out. Coverage is rated at 140 m² (1500 ft²) per unit with 380+ concurrent clients, and the ceiling, wall and junction-box mounting kits are all in the box.

WPA3, Captive Portal and VLAN Segmentation

Security is the usual Omada set: WPA3, WPA2 and WPA Personal and Enterprise, captive portal authentication for guest onboarding, SSID-to-VLAN mapping to keep guest and corporate traffic apart, wireless client isolation, a MAC filter with up to 4,000 entries, and rogue AP detection to flag unauthorised transmitters. Up to 24 SSIDs are available, eight per band, which is enough to run corporate, guest, IoT and voice networks from the same hardware.

Ideal For

Singapore offices, schools, clinics and hotels moving to Wi-Fi 7 on a multi-gigabit backbone, and IT teams or MSPs who want 10G uplink headroom in a slim ceiling AP managed centrally under Omada. Supplied by SourceIT with local Singapore warranty, GST invoice and project pricing on request.