Poly Rove 30 Wireless DECT IP Phone Handset

SKU: 2200-86930-102 / 84H76AA

S$248.40
Unit price per
Save S$101.20

Shipping calculated at checkout.

PRODUCT DESCRIPTION

Poly Rove 30 Wireless DECT IP Phone Handset (2200-86930-102 / 84H76AA) - Local Warranty

Poly Rove 30 Ruggedised DECT IP Phone Handset

The Poly Rove 30 is the ruggedised handset in Poly’s Rove wireless DECT IP phone range, built for staff whose phone has to survive the job. It is rated IP65 dust-tight and water resistant and drop proof up to 2 m (6.6 ft), and carries a 6.1 cm (2.4") 240 x 320 backlit colour display with three softkeys and four programmable line keys. A replaceable 1100 mAh Li-ion battery delivers up to 18 hours of talk time and up to 300 hours of standby. Supplied as a handset-only unit, it registers to any Poly Rove B1, B2 or B4 base station.

IP65 Rated and Drop Proof to 2 Metres

This is the specification that separates the Rove 30 from an office cordless phone. IP65 means the handset is sealed against dust ingress and resistant to water jets, and Poly rates it to survive drops of up to 2 m onto a hard floor. For Singapore logistics yards, food production floors, workshops and hospital wards, that is the difference between a phone that lasts a deployment cycle and one that is replaced every few months.

A 2.4-Inch Colour Display Built for Gloved Hands

The 6.1 cm (2.4") backlit colour TFT LCD runs at 240 x 320 with 64K colours, giving a clear, high-contrast readout of caller ID, directory entries and call state in poor lighting. Three softkeys and four programmable line keys put frequently used lines, shortcuts and pickup groups a single press away.

Full-Shift Battery with a Swappable Pack

The 1100 mAh Li-ion battery is rated at up to 18 hours of talk time and up to 300 hours of standby, and Poly specifies it as both rechargeable and replaceable — so a spare charged pack keeps a handset in service across back-to-back shifts instead of parking it in a cradle.

Secure DECT on the Correct Singapore Band

This is the 1880–1900 MHz build, the DECT band used in Singapore and across APAC. It is DECT™ security certified with end-to-end encryption maintained even through a repeater, delivers up to 50 m of indoor range per cell, and works as part of an Open SIP system with standards-compliant IP PBX and hosted voice platforms.

Ideal For

Warehousing and 3PL operations, manufacturing and food production, healthcare wards and facilities teams, hotels, and any Singapore site where the handset is exposed to dust, moisture or drops.

Poly Rove 30 Datasheet — Technical Specifications

Model	Poly Rove 30 DECT phone handset
Part number	Poly 2200-86930-102 / HP 84H76AA
Product type	Ruggedised wireless DECT IP phone handset (handset only — requires a Poly Rove base station)
Colour	Black
Warranty	Local Warranty (Singapore)

Handset Specifications

Display	6.1 cm (2.4") backlit colour TFT LCD, 240 x 320 pixels, 64K colours
Weight	168 g (handset); 65 g (charging cradle)
Keys	3 softkeys; 4 programmable line keys
Audio	Poly HD Voice; full-duplex conversations; acoustic echo cancellation; background noise suppression
Headset port	1 x 3.5 mm headset jack
Durability	IP65 dust-tight and water resistant; drop proof up to 2 m (6.6 ft)
Battery	1 x 1100 mAh Li-ion, rechargeable and replaceable
Talk time	Up to 18 hours
Standby time	Up to 300 hours
DECT frequency	1880 to 1900 MHz (EU / ANZ / UK build)
Wireless range	Up to 50 m (165 ft) indoor
Security	DECT™ security certified
Dimensions (W x D x H)	56.9 x 146.3 x 36.8 mm
Operating temperature	-10 to 55 °C
Operating humidity	5 to 95%
Power	External universal AC adapter: 5 V 1 A DC (model-specific plugs)
Certification	UL 62368-1

Compatibility & Software Support

Poly Rove System Compatibility

The Poly Rove range is a single interoperable DECT system. All Poly Rove handsets — Rove 20, Rove 30 and Rove 40 — register to any Poly Rove base station, and the Rove R8 repeater is compatible with all Poly Rove products. This means you can mix entry-level and ruggedised handsets on one base and add coverage later without replacing what you already own.

Call Platform and Standards Support

Poly Rove is an Open SIP solution and supports SIP-based calling on standards-compliant IP PBX and hosted voice platforms. HP lists the Poly Rove range as Zoom certified. SourceIT can confirm interoperability against your specific Singapore SIP trunk or hosted PBX provider before you order.

Telephony architecture	Open SIP wireless DECT IP phone system
Handset compatibility	Poly Rove 20, Rove 30 and Rove 40 (all bases)
Repeater compatibility	Poly Rove R8 — compatible with all Poly Rove products
DECT band (this SKU)	1880 to 1900 MHz (EU / ANZ / APAC build)
Security	DECT™ security certified; DECT end-to-end encryption, including in repeater mode
Provisioning	HTTPS; encrypted XML via TFTP or HTTP
Cloud management	Polycom Device Management Service for Service Providers (PDMS-SP)
Platform certification	Zoom certified (per HP)

A note on the DECT frequency band

Poly builds the Rove range in two radio variants: a 1920–1930 MHz North American SKU and an 1880–1900 MHz EU / ANZ / UK SKU. The Rove 30 stocked by SourceIT is the 1880–1900 MHz build, which is the correct DECT band for Singapore. North American 1920–1930 MHz units bought from overseas will not operate legally or reliably here — always check the band before you buy grey stock.

Package Contents & Poly Rove Ordering Information

What’s in the Box

Poly Rove 30 ruggedised DECT handset
Battery (1100 mAh Li-ion)
Charging cradle
AC power adapter
Belt clip
Quick start guide
Safety information sheet

The Rove 30 handset ships without a base station and must be registered to a Poly Rove B1, B2 or B4 base.

Poly Rove Handsets & Kits — Ordering Information

Poly Rove 20 Wireless DECT IP Phone Handset Entry-level handset, 2" colour display, up to 35 h talk	2200-88090-102 / 8F3E4AA
Poly Rove 20 Handset with B1 Single-Cell Base Station Kit Complete starter system, base + handset in one box	8F3E3AA
Poly Rove 30 Wireless DECT IP Phone Handset (this listing) Ruggedised IP65 handset, 2.4" colour display	2200-86930-102 / 84H76AA
Poly Rove 30 Handset with B2 Single/Dual-Cell Base Station Kit Complete ruggedised system, base + handset in one box	8J8W5AA
Poly Rove 40 Wireless DECT IP Phone Handset Premium IP65 handset with Bluetooth, vibrate and alarm key	84H77AA

Poly Rove Base Stations, Repeater & Charging

Poly Rove B2 Single/Dual-Cell DECT Base Station Up to 20 handsets, 10 calls single cell / 20 calls dual cell	8J8W3AA
Poly Rove B4 Multi-Cell DECT Base Station Up to 30 handsets per base, scales to 254 bases per system	8J8W4AA
Poly Rove R8 DECT Repeater Extends coverage to up to 300 m without extra cabling	84H79AA
Poly Rove 30/40 Multi-Handset Battery Charging Station Charges multiple Rove 30/40 handsets and spare batteries	2200-86860-001 / 85W96AA0

Datasheet & Downloads

Official HP Poly documentation for the Poly Rove 30. Links open on hp.com in a new tab.

Need the specification sheet as a PDF for a tender or an ICT quotation? Email the SourceIT team and we will send the current HP Poly datasheet along with a formal quote.

Frequently Asked Questions — Poly Rove 30

How rugged is the Poly Rove 30?

Poly rates the Rove 30 as IP65 dust-tight and water resistant, and drop proof up to 2 m (6.6 ft). That is a genuine industrial specification — it is designed to survive being dropped onto a warehouse floor and hosed-down environments, not merely a splash. The entry-level Rove 20 carries no published IP or drop rating, so if the handset will live on a loading bay, in a kitchen or on a production line, the Rove 30 is the correct choice.

What is the difference between the Rove 30 and the Rove 40?

They share the same 2.4" 240 x 320 colour display, the same 1100 mAh battery rated at up to 18 hours talk and 300 hours standby, and the same IP65 / 2 m drop rugged build. The Rove 40 adds Bluetooth 4.2 for wireless headsets, a vibrate mode and an alarm / emergency button. If your staff need Bluetooth headsets or a lone-worker alarm key, specify the Rove 40; otherwise the Rove 30 delivers the same core performance for less.

Do I need a base station, and which one?

Yes — this is a handset-only listing. It registers to the single-cell B1 base (sold in Singapore as part of the Rove 20 + B1 kit), the B2 single/dual-cell base for up to 20 handsets, or the B4 multi-cell base for large sites. If you want a complete Rove 30 system in one box, order the Rove 30 + B2 base kit (8J8W5AA) instead.

Is the battery replaceable, and can I charge spares?

Yes. Poly specifies the 1100 mAh Li-ion cell as rechargeable and replaceable, so a depleted battery can be swapped for a charged one rather than taking the handset out of service. For shift-based teams, the Poly Rove 30/40 multi-handset battery charging station charges several handsets and spare batteries from a single position.

How much coverage does one base give in a Singapore warehouse?

HP quotes up to 50 m (165 ft) indoors and up to 300 m (984 ft) outdoors per cell. Racking, cold rooms and reinforced concrete reduce that in practice, so multi-level or deep-rack sites typically add Rove R8 repeaters or move to a multi-cell B4 deployment. SourceIT can help scope the cell count before you order.

Is this the correct DECT band for Singapore?

Yes. Poly builds the Rove 30 in two radio variants — a 1920–1930 MHz North American SKU and an 1880–1900 MHz EU / ANZ / UK SKU. This listing is the 1880–1900 MHz build (Poly part 2200-86930-102), which is correct for Singapore.

Does the Poly Rove 30 come with a warranty in Singapore?

Yes. Every Poly Rove 30 sold by SourceIT comes with local Singapore warranty and a GST invoice.