Vertiv Liebert LTS 10A 1U Rack Load Transfer Switch, Dual C14 Input, 8x C13 Outlets

Vertiv Liebert LTS 10 A Load Transfer Switch, Dual C14 Input, 8x C13 (LTS 10A, 02312189) - 2 Years Local Warranty

Dual-Source Redundancy for Single-Corded Equipment

The Vertiv™ Liebert® LTS™ is a two-pole automatic load transfer switch for 220/230 V single-phase racks. It takes two independent AC feeds — typically an A-feed and a B-feed from two UPS systems, or UPS and mains — and supplies its outlets from the main source, switching automatically to the standby source if the main one fails.

As Vertiv points out, usually only high-end servers have dual power supplies. Switches, routers, hubs, entry-level servers and specialised instruments are single-corded, and the LTS lets you put that equipment on two redundant power paths without replacing it.

“First Disconnect, Then Connect” Transfer

The LTS uses a break-before-make control method. If one source fails, the load is moved to the redundant source in under 6 ms typical (11 ms maximum). If a short circuit occurs on the load side, the design stops the fault from being carried across to the standby source, so the second feed stays healthy for the rest of your rack.

Full DSP control handles detection and transfer, and advanced power-off detection lets the unit judge a source failure quickly.

This Model: 10 A, Dual C14 Input, 8 x C13

The Liebert LTS 10A (Vertiv part 02312189) is rated 10 A, accepts its two feeds on 2 x IEC 60320 C14 (one per source) and distributes power on 8 x IEC C13 (10 A each). It is a 1U 19-inch rack unit (44 x 430 x 250 mm H x W x D, 4.5 kg), so it fits in the same rack as the equipment it protects. Remote monitoring is available through an optional SNMP card.

Where It Fits

Vertiv lists computer equipment rooms, internet data centres, telecom and financial data centres, and industrial process control centres as typical applications. In a Singapore server room it is a simple way to give network switches, firewalls and single-PSU servers the same A/B redundancy as your dual-corded kit.

Supplied in Singapore by SourceIT

SourceIT supplies the Vertiv Liebert LTS range with a GST invoice and local support, with a 2-year warranty per the Singapore distributor price book. Unsure which input or outlet mix you need? Email sales@sourceit.com.sg with your two power sources and the equipment you want to protect.