Ergotron LX Wall Mount Monitor Arm Matte Black
PRODUCT DESCRIPTION
Ergotron LX Wall Mount Monitor Arm Matte Black (45-243-224) - 10 Years Local Warranty
Wall-Mounted Monitor Arm with 13″ of Lift
The Ergotron LX Wall Monitor Arm (45-243-224) mounts a single display directly to the wall and gives it 13″ (33 cm) of height adjustment, so the screen sits at true eye level instead of forcing the neck down or up. Ergotron rates the arm for displays of 7–25 lbs (3.2–11.3 kg) and screens up to approximately 34″ diagonal.
Constant Force™ Fingertip Adjustment
Ergotron's patented Constant Force™ lift-and-pivot technology is what separates the LX from a friction-hinge mount. The display moves with one finger and stays exactly where it is set — no knobs to re-tighten, no drift over time. With 75° of tilt (70° up / 5° down), 360° pan and 360° rotation, the screen goes from landscape to portrait and back in seconds.
Frees the Entire Desk Surface — Ideal for Singapore's Compact Workspaces
Taking the monitor off the desk and onto the wall recovers the whole worktop, which matters in Singapore offices, clinical bays, reception counters and hot-desking floors where floor area is the expensive constraint. The arm extends up to 25″ (64 cm) from the wall when you need the screen close, then folds back over its base into a compact retracted position when you don't. Adding the optional 9″ LX Extension takes total reach to 34″ (86 cm).
Built-In Cable Management and a Clean Matte Black Finish
A cable-management channel routes power and video cables under the arm and out of sight, so a wall-mounted screen looks deliberate rather than improvised. The matte black finish keeps the installation visually quiet in meeting rooms, consult rooms and customer-facing counters. The arm weighs just 5.4 lbs (2.5 kg) and sits 4″ (10 cm) deep.
Ten-Year Ergotron Warranty, Supported Locally
Ergotron backs the LX Wall Monitor Arm with a 10-year manufacturer warranty — an unusually long term for a mechanical mount, and a direct statement about the durability of the Constant Force mechanism. SourceIT Pte Ltd supplies the arm with local Singapore warranty support and a GST invoice.
Ergotron LX Wall Monitor Arm Datasheet — Technical Specifications
General
| Product Name | Ergotron LX Wall Monitor Arm |
| Part Number | 45-243-224 |
| Finish | Matte Black |
| Number of Displays | 1 |
| Mounting Type | Wall — attaches directly to a sturdy vertical surface |
| Product Weight | 5.4 lbs (2.5 kg) |
| Product Depth | 4″ (10 cm) |
| Shipping Weight | 6.2 lbs (2.8 kg) |
| Shipping Dimensions | 17.6″H × 7.5″W × 5.7″D (45 × 19 × 14 cm) |
| Manufacturer Warranty | 10-Year Manufacturer Warranty (Ergotron) |
| Local Warranty | Local Warranty (Singapore) |
Display Compatibility
| Display Weight Capacity | 7–25 lbs (3.2–11.3 kg) |
| Display Size | Up to approximately 34″ diagonal |
| VESA Standard | VESA MIS-D |
Adjustment & Motion
| Height Adjustment (Lift) | 13″ (33 cm) |
| Tilt | 75° total (70° up / 5° down) |
| Pan | 360° |
| Rotation | 360° — portrait and landscape |
| Extension / Reach | Up to 25″ (64 cm); up to 34″ (86 cm) with a second extension |
| Retraction | Folds back over the base into a compact retracted position |
| Lift Technology | Ergotron Constant Force™ lift-and-pivot motion technology |
Design & Durability
| Cable Management | Cable-management feature routes cables under the arm, out of the way |
| Included Mounting Hardware | Fasteners for direct attachment to wood studs or concrete surfaces are included |
| Available Finishes | 45-243-026 polished aluminium · 45-243-224 matte black · 45-243-216 white |
Compatibility & Fit
VESA fit. Ergotron specifies this arm as VESA MIS-D. Check the four mounting holes on the back of your display against the MIS-D pattern before ordering; monitors sold with a proprietary stand and no VESA holes will need the manufacturer's own VESA adapter plate.
Weight and size fit. The rated window is 7–25 lbs (3.2–11.3 kg) for screens up to roughly 34″. The lower bound is real, not a formality: a very light panel below 7 lbs may not have enough mass for the Constant Force spring to hold position smoothly. Above 25 lbs, step up to a heavy-duty model — see the comparison in the FAQ below.
Ultrawide and curved displays. Ergotron's published limit is by weight and diagonal, not by aspect ratio. A 34″ ultrawide within the 25 lbs limit and carrying a MIS-D pattern will mount; because an ultrawide puts more mass either side of the pivot, mount it centrally and re-check the tension adjustment after fitting. Deep curved panels shift the centre of gravity further from the wall, so verify the panel's actual weight against the 25 lbs ceiling rather than assuming.
Number of screens. This is a single-display arm. For two screens on one wall point, look at a dual wall solution rather than fitting two of these side by side too closely.
Wall type — important in Singapore. Ergotron's instruction is to attach directly to a sturdy vertical surface, and to install into a wood stud where applicable. Fasteners for wood stud and concrete are supplied in the box. Most Singapore commercial and HDB/condo walls are reinforced concrete or solid block, which suits the supplied concrete fixings — but drywall or partition walls without a backing stud or steel-stud kit are not suitable on their own. If the mounting point is a plasterboard partition, have the wall assessed before installation. SourceIT can advise.
Desk-mount alternative. If a wall fixing is not permitted in a leased office, the same LX arm is available in a desk-clamp / grommet version — see the LX Desk Mount Monitor Arm links in the ordering section.
Package Contents & LX Series Ordering Information
In the box
- LX arm
- Extension
- Wall-mount base
- Fasteners for direct attachment to wood studs or concrete surfaces
- Ergotron installation instructions
Ergotron's datasheet itemises the box as arm, extension and wall-mount base with mounting fasteners; no further parts list is published.
LX Wall Monitor Arm — finishes
| Matte Black | 45-243-224 (this listing) |
| Polished Aluminium | 45-243-026 |
| White | 45-243-216 — listed by Ergotron; not currently stocked by SourceIT, available on indent |
Related LX arms in the SourceIT catalogue
| LX Desk Mount Monitor Arm (desk clamp / grommet) | Matte Black 45-241-224 · Polished Aluminium 45-241-026 · White 45-490-216 |
| LX Sit-Stand Wall Mount LCD Arm (20″ lift) | LX Sit-Stand Wall Mount LCD Arm (45-353-026) |
| LX Sit-Stand Desk Arm | LX Sit-Stand Desk Arm (45-360-026) |
Accessories & extensions
| LX Extension (adds reach) | LX Extension (45-289-026) |
| LX Extension Arm Kit | LX Extension Arm Kit (97-940-026) |
| Notebook Tray | Notebook Tray (50-193-200) |
Datasheet & Downloads
Ergotron LX Wall Monitor Arm (45-243) product page — official Ergotron product page.
Ergotron LX Wall Monitor Arm datasheet — official Ergotron datasheet (PDF).
All technical figures published on this page are taken from the official Ergotron datasheet for this part number. Where Ergotron does not publish a figure, SourceIT omits it rather than estimate. For a written quotation or a bulk/project price in Singapore, contact SourceIT Pte Ltd.
Frequently Asked Questions — Ergotron LX Wall Monitor Arm
What is the difference between the matte black, polished aluminium and white versions?
Only the finish. 45-243-224 is matte black, 45-243-026 is polished aluminium and 45-243-216 is white. Load capacity, lift, tilt, pan, rotation, reach and warranty are identical across all three — they share one Ergotron datasheet. Choose on appearance and on what the rest of the room already uses.
What size and weight of monitor does the LX Wall Monitor Arm take?
Ergotron rates it for displays weighing 7–25 lbs (3.2–11.3 kg), up to approximately 34″ diagonal. Weight is the binding constraint, not diagonal — always check your monitor's specification sheet for its panel weight without the stand.
Can it hold two monitors?
No. This is a single-display arm. For a two-screen wall installation you need a dual wall solution; talk to SourceIT about the current dual options for your screen size and weight.
What kind of wall can it be fitted to, and is the hardware included?
Fasteners for wood stud and for concrete are included in the box. Ergotron's instruction is to attach directly to a sturdy vertical surface and to install to a wood stud where applicable. Concrete and solid block walls — the norm in most Singapore buildings — are suitable. A plasterboard partition with no stud behind it is not, without additional backing.
Do I need a VESA adapter?
Only if your display does not carry a VESA MIS-D hole pattern. Most business monitors do. Displays sold with a proprietary stand — some all-in-ones and consumer TVs — need the manufacturer's own VESA adapter plate, which is not supplied with the arm.
How does this compare with the LX Desk Mount Monitor Arm and the LX Sit-Stand Wall Mount LCD Arm?
The LX Desk Mount Monitor Arm clamps to the desk instead of the wall — choose it when you cannot drill. The LX Sit-Stand Wall Mount LCD Arm is the sit-stand wall model: it lifts 20″ (51 cm) instead of 13″ (33 cm), reaches 33″ (84 cm) and takes screens to 42″, so pick it if the same screen has to serve a seated and a standing user.
Can I extend the reach further?
Yes. Ergotron publishes a total reach of 34″ (86 cm) when a second extension is fitted, against 25″ (64 cm) as standard. See the LX Extension in the ordering section.
Is the Ergotron LX Wall Monitor Arm covered by warranty in Singapore?
Yes. Every Ergotron LX Wall Monitor Arm sold by SourceIT comes with local Singapore warranty and a GST invoice; Ergotron backs the LX Wall Monitor Arm with a 10-year manufacturer warranty.
