RTX PRO 6000 Blackwell vs H200 vs B300: Which GPU Belongs in Your Inference Server?
NVIDIA sells three data-centre GPUs that an enterprise might reasonably put on the same shortlist for inference: the RTX PRO 6000 Blackwell Server Edition, the H200 and the B300. They are not small, medium and large versions of one product. They are built for different servers and different jobs.
Our view: for most enterprise inference, the least glamorous of the three is the right one.
The three at a glance
| Compare | RTX PRO 6000 Blackwell Server Edition | H200 | B300 (Blackwell Ultra) |
|---|---|---|---|
| 💾 Memory per GPU | 96 GB GDDR7 |
141 GB HBM3e |
288 GB HBM3e |
| 🚀 Memory speed | About 1.6 TB/s |
4.8 TB/s |
Up to about 8 TB/s |
| ⚡ Power per GPU | Up to 600 W (configurable) | Up to 700 W in HGX form, 600 W as a PCIe card | Reported at about 1,400 W |
| 🧱 How it is fitted |
Standard card Dual-slot PCIe card for general GPU servers |
Both HGX 8-GPU board, or a PCIe card |
Platform only HGX B300 8-GPU servers and GB300 racks |
| 🔀 Splitting one GPU between users | Up to 4 isolated instances | Up to 7 isolated instances | Check with the server vendor |
| 🔢 Double-precision maths for simulation | Not its focus |
Strong 34 teraflops |
Weak Reported at 1.2 teraflops |
| 🎨 Graphics and rendering |
Yes AI plus rendering, 3D and video |
Compute only | Compute only |
Sources: PNY: RTX PRO 6000 Blackwell Server Edition, Puget Systems specification listing, NVIDIA H200, The Register on Blackwell Ultra, Exxact GPU comparison. B300 power and memory-speed figures are third-party reports, not an NVIDIA datasheet we have seen; confirm with the server vendor.
RTX PRO 6000 Blackwell: the practical one
This is a 96 GB card in a standard dual-slot shape with no fan of its own. It relies on the server's airflow and slots into general-purpose GPU servers, several to a chassis. NVIDIA positions it as a universal data-centre GPU: AI inference, but also rendering, simulation of physical environments, 3D and video.
Its strengths are ordinary and valuable. You can start with two cards and add more. The server around it is a familiar x86 machine. And 96 GB is enough to hold a 34B model at full precision or a 70B model once quantised, as we worked out in How Many GPUs Does Your AI Model Really Need?
Where it falls short: its memory is slower than the HBM used on the other two, and the cards talk to each other over PCIe, not NVLink. For one very large model spread across many GPUs, that matters.
H200: the proven workhorse
The H200 is the last and largest of the Hopper generation: 141 GB of fast HBM3e memory at 4.8 TB/s. Eight of them on an HGX board give 1.1 TB in one server, joined by NVLink so they can act together on a large model.
It is no longer the newest part, which is partly the appeal. The software is mature, the servers are well understood, and it keeps strong double-precision performance for sites that mix AI with scientific computing.
Where it falls short: it is a generation behind on AI-specific speed, and an 8-GPU HGX server is a serious machine in power and cooling terms, whichever GPU sits on the board.
B300: the heavy lifter
The B300, sold as Blackwell Ultra, carries 288 GB per GPU. An 8-GPU HGX B300 server holds about 2.3 TB, enough for the very largest open models with room for long contexts and many users.
You do not buy a B300 as a card. You buy it as a platform: an HGX B300 server of eight to ten rack units, or a GB300 NVL72 rack. That brings the facility questions with it.
Where it falls short: for mixed science workloads. Independent comparisons list its double-precision performance far below the H200's, a trade made deliberately in favour of AI formats. We covered that in GB200 vs GB300 NVL72.
The view vendors will not volunteer
Flagship GPUs get the headlines, and sales conversations tend to start at the top of the range and work down. For inference, it makes more sense to start at the bottom and work up.
Most enterprise inference today is models of 70B parameters or fewer, serving internal users. That workload fits on a handful of 96 GB cards in a server your team already knows how to run. Buying HGX-class hardware for it is not wrong, but it is a purchase of headroom, and headroom has a price in power, cooling and capital.
The fair counter-argument: models and usage both grow, and a server bought for today's workload can look small in eighteen months. If you have a concrete plan that needs the larger machine, buy it. If the plan is "we might", buy the smaller one and keep the difference.
Which one, by workload
| Your workload | Lean towards |
|---|---|
| 💬 Chat, search and assistants on models up to about 70B | RTX PRO 6000 |
| 🎨 AI alongside rendering, digital twins or video | RTX PRO 6000 |
| 🔬 AI mixed with simulation or other scientific computing | H200 |
| 🔧 Fine-tuning large models on a proven platform | H200 or B300 |
| 🧠 The largest open models, long contexts, many users | B300 |
| 🏢 A server room with limited power and cooling | RTX PRO 6000 in small numbers |




