Ergotron Notebook Tray for Laptops and Convertible
PRODUCT DESCRIPTION
Ergotron Notebook Tray for Laptops and Convertible Notebooks (50-193-200) - Local Warranty
Put a Laptop on Your Ergotron LX Arm
The Ergotron Notebook Tray converts an Ergotron LX monitor arm into a laptop mount. Instead of a notebook sitting flat on the desk with its screen well below eye level, the tray lifts it onto the arm — where it can be raised, lowered, tilted and rotated exactly like a monitor. For anyone working all day from a laptop, that single change does more for neck and shoulder posture than any other accessory on the desk.
Rated 2.5 to 12 lbs on an LX Arm
Ergotron specifies that when combined with the LX LCD Arm, the arm will hold notebooks weighing 2.5 to 12 lbs (1.1 to 5.4 kg). Note that this is a genuine range: LX arms use Constant Force lift technology and are counterbalanced to the load they carry, so a notebook below the minimum is as much of a problem as one above the maximum. Almost every mainstream 13 to 16 in business laptop sits comfortably inside the band.
Full Arm Motion — Lift, Tilt and Rotate
Because the tray inherits the motion of the arm it mounts to, the laptop tilts forward and backward for screen angle and rotates between portrait and landscape along with the arm head. Combined with the LX arm’s own height and reach adjustment, that means the notebook screen can be brought genuinely to eye level rather than propped up on a stack of books.
Non-Slip Pads, and an Honest Caution About Them
The tray uses non-slip pads to keep the notebook in place. Ergotron is direct about the limits of this and so are we: the pads help prevent the notebook from slipping, but they will not hold all notebooks on the tray in all circumstances. This is a desk accessory, not a locking security mount — if the tray will live in a shared, public-facing or high-traffic area, plan a separate physical security measure.
Supplied by SourceIT With Local Support
SourceIT supplies the Ergotron Notebook Tray across Singapore with local warranty support and a GST invoice. Ergotron’s published warranty schedule covers the LX arm the tray attaches to with a 10-year term, but does not publish a separate manufacturer term for this accessory — so we do not claim one. Contact us and we will confirm the coverage that applies to your order in writing before you buy.
Ergotron Notebook Tray Datasheet — Technical Specifications
General
| Product | Ergotron Notebook Tray (Ergotron’s installation guide indexes it as “LX Notebook Tray”) |
| Part Number | 50-193-200 |
| Product Type | Laptop / notebook platform accessory for Ergotron LX monitor arms |
| Retention | Non-slip pads. Ergotron’s stated caution: the pads “will help prevent notebook from slipping, but they will not hold all notebooks on the tray in all circumstances” |
| Manufacturer Warranty (Ergotron) | No separate term published. This accessory does not appear in Ergotron’s published warranty schedule, which covers monitor mounts, carts, charging systems and desks by category. Ergotron publishes a 10-year term for the LX arm the tray attaches to. SourceIT will confirm applicable coverage in writing on request rather than state a figure Ergotron does not publish |
| Local Warranty (Singapore) | Included with every unit sold by SourceIT |
Capacity & Fit
| Weight Capacity | 2.5 to 12 lbs (1.1 to 5.4 kg) when combined with the Ergotron LX LCD Arm — a working range with a minimum as well as a maximum |
| Other Arms and Pivots | Ergotron’s instruction: when combined with arms or pivots other than the LX LCD Arm, contact Ergotron regarding load limitations |
| Device Type | Traditional laptops and convertible notebooks |
| Screen Size Limit | Ergotron publishes no laptop screen-size or footprint limit for this tray — specify by weight |
Adjustment & Motion
| Tilt | Forward and backward, inherited from the arm head. Ergotron publishes no degree figure for the tray |
| Rotation | Portrait and landscape, inherited from the arm head |
| Height & Reach | Provided by the LX arm the tray is fitted to, not by the tray itself |
Dimensions & Mounting
| Published Dimensional Figures | Ergotron’s dimensional drawing DIM-LXNB prints 9.25 to 15.75 in (236 to 401 mm), 9 in (229 mm) and 3.0 in (75 mm). The drawing’s axis callouts are not machine-readable, so we have not assigned these to width, depth or lip — see the linked drawing for the annotated original |
| Mounts To | Ergotron LX monitor arms, including the LX Wall Mount Arm and the LX LCD Arm |
| Fixing | M4 x 10 mm screws into the arm’s mounting plate. Ergotron does not print a VESA designation for this interface |
| Reference Documents | Ergotron installation guide 888-97-088-W and dimensional drawing DIM-LXNB |
Every figure above is taken from Ergotron’s own installation guide, dimensional drawing and LX Wall Mount product sheet. Product weight, construction materials and a finish or colour designation are not published by Ergotron for this part number and have been omitted rather than estimated — including the colour, which resellers list inconsistently. The 40 lbs figure that appears on Ergotron’s 100 Series keyboard-tray pivot documentation belongs to a different product and has deliberately not been carried across.
Compatibility & Fit
This is an accessory, not a standalone stand: it has no base and no legs, and it must be fitted to an Ergotron arm to be used at all. Ergotron confirms it mounts to Ergotron LX monitor arms, naming the LX LCD Arm and the LX Wall Mount Arm specifically. For any other Ergotron arm or pivot, Ergotron’s own instruction is to contact Ergotron regarding load limitations — so treat other arms as needing confirmation rather than assumed to work. SourceIT will check your specific arm model against the tray before you order.
Specify by weight, not screen size. The published rating is 2.5 to 12 lbs (1.1 to 5.4 kg) on an LX LCD Arm, and Ergotron publishes no laptop screen-size or footprint limit at all. The minimum matters as much as the maximum: LX arms are Constant Force mechanisms, counterbalanced to the load, so an unusually light notebook can leave the arm over-tensioned. Weigh the machine, including anything that stays attached to it.
Mounting interface. The tray fixes to the arm’s mounting plate with M4 x 10 mm screws. Ergotron does not print a VESA designation for this connection, so we do not quote one — it is an arm-specific fitting rather than a generic VESA pattern, which is another reason to confirm your exact arm model with us first.
What it is not. The tray retains the notebook with non-slip pads only. Ergotron states plainly that these will not hold all notebooks in all circumstances. It is not a locking or anti-theft mount, and it is not intended for a cart that will be pushed around a ward or a classroom — for mobile use with device security, look at a cart with an integrated security system such as the Neo-Flex Laptop Cart (24-205-214).
| Mounts To | Ergotron LX monitor arms (LX LCD Arm, LX Wall Mount Arm) |
| Other Arms / Pivots | Contact Ergotron — load limitations must be confirmed |
| Weight Window | 2.5 to 12 lbs (1.1 to 5.4 kg) on an LX LCD Arm — minimum and maximum both apply |
| Device Type | Traditional laptops and convertible notebooks |
| Screen Size | Not published by Ergotron — specify by weight |
| Fixing | M4 x 10 mm screws to the arm mounting plate; no VESA designation published |
| Retention | Non-slip pads — not a locking or security mount |
| Desk Clamp / Grommet / Wall | Not applicable — determined by the LX arm it is fitted to |
Package Contents & LX Series Ordering Information
In the box: Ergotron’s installation guide 888-97-088-W shows the tray, non-slip pads, M4 x 10 mm screws and an M3 x 6 mm screw. Exact quantities are not fully legible in the scanned parts diagram, so treat this as a partial list and ask SourceIT to confirm carton contents before ordering in quantity. The LX arm itself is not included — the tray is an accessory and requires a compatible Ergotron LX arm to function.
Notebook Tray — Ordering
| 50-193-200 — Ergotron Notebook Tray (this listing) | 2.5 to 12 lbs (1.1 to 5.4 kg) on an LX LCD Arm · non-slip pads · tilt and rotation via the arm head |
Ergotron lists no alternative finish or second part number for the Notebook Tray — 50-193-200 is the only variant we can confirm.
Related Ergotron Products at SourceIT
| 24-205-214 — Neo-Flex Laptop Cart | Mobile sit-stand laptop cart with integrated laptop security, 12 to 17 in · 3 to 15 lbs (1.36 to 6.8 kg) |
| SV10-1100-0 — StyleView Laptop Cart SV10 | Light-duty medical laptop cart · 15 in (38.1 cm) lift · 7-year warranty |
| 33-468-921 — WorkFit Corner Standing Desk Converter | Corner desktop sit-stand converter · 15 in (38 cm) lift · 35 lbs (15.9 kg) |
Datasheet & Downloads
- Ergotron Notebook Tray (50-193) — Official Product Page
- Ergotron 888-97-088-W — Notebook Tray Installation Guide (PDF)
- Ergotron DIM-LXNB — Notebook Tray Dimensional Drawing (PDF)
- Ergotron LX Wall Mount — Product Sheet (PDF, confirms Notebook Tray 50-193-200 as the LX laptop accessory)
- Ergotron Limited Warranty Terms and Conditions (PDF)
Ergotron does not publish a standalone marketing datasheet for the Notebook Tray; the installation guide and dimensional drawing above are the primary official specification sources for this part number.
SourceIT supplies Ergotron across Singapore with local warranty support and a GST invoice. Contact us for volume pricing, site survey and delivery scheduling.
Frequently Asked Questions — Ergotron Notebook Tray
What does the tray actually attach to?
An Ergotron LX monitor arm. Ergotron names the LX LCD Arm and the LX Wall Mount Arm specifically. It is an accessory with no base of its own, so it cannot be used on a desk by itself. For any arm other than an LX, Ergotron’s instruction is to contact Ergotron about load limitations — send SourceIT your arm model and we will check it.
What weight of laptop will it take?
2.5 to 12 lbs (1.1 to 5.4 kg) when combined with the LX LCD Arm. Almost every mainstream 13 to 16 in business laptop falls inside that band.
Why is there a minimum weight?
Because Ergotron LX arms use Constant Force lift technology, which is counterbalanced to the load it carries. Too light and the arm is over-tensioned and drifts upward; too heavy and it will not hold position. Set the arm’s tension to the actual notebook after fitting the tray, and re-set it if you change machines.
Is there a maximum laptop screen size?
Ergotron publishes none for this tray, so we do not quote one. Specify by weight instead. If your notebook is physically much larger than the tray, send us the model and we will check the footprint against Ergotron’s dimensional drawing.
Does the laptop lock to the tray?
No. Retention is by non-slip pads, and Ergotron states directly that these will not hold all notebooks in all circumstances. Treat it as a desk accessory rather than a security mount — for mobile or public-facing use, specify a cart with an integrated security system such as the Neo-Flex Laptop Cart (24-205-214).
Do I need a VESA adapter?
No. The tray bolts to the LX arm’s own mounting plate with M4 x 10 mm screws. Ergotron does not print a VESA designation for this interface, which is why confirming your exact arm model matters more here than a VESA pattern would.
Can I still tilt and rotate the screen?
Yes — the tray inherits the arm head’s motion, so the notebook tilts forward and backward and rotates between portrait and landscape. Ergotron publishes no degree figures for the tray itself.
What warranty applies in Singapore?
Every Ergotron Notebook Tray sold by SourceIT comes with local Singapore warranty and a GST invoice. Ergotron does not publish a separate manufacturer warranty term for this accessory — its published schedule covers monitor mounts, carts, charging systems and desks by category, and the LX arm this tray fits carries a 10-year Ergotron term. Rather than quote a figure Ergotron does not publish, we will confirm the exact coverage that applies to your order in writing before you buy.
