Crestron DMPS Essentials 4K Multiformat 2x1 AV Switch and Receiver
Email sales@sourceit.com.sg or use Request for Quotation below and our team will confirm the latest price, availability and lead time.
PRODUCT DESCRIPTION
Crestron DMPS Essentials 4K Multiformat 2x1 AV Switch and Receiver - Local Warranty
A compact 2x1 AV switch and receiver for conference rooms and classrooms, combining one DM Essentials input and one local HDMI input with a 4K-scaled HDMI output and onboard room control ports.
Key Features
- One DM Essentials input and one HDMI input with automatic or manual switching
- HDMI output with built-in 4K scaler; inputs up to 4K60 4:2:0
- Stereo line-level analog audio output
- RS-232, IR, 2 relay and 2 Versiport I/O control ports plus CEC
- HDCP 2.2 and EDID management
- XiO Cloud support and native Cisco Webex / Touch 10 integration
- Compact surface or rack rail mount; power pack included
HD-RX-4K-210-C-E Datasheet — Technical Specifications
General
| Product Name | DMPS Essentials 4K Multiformat 2x1 AV Switch and Receiver |
| Brand | Crestron |
| Part Numbers | HD-RX-4K-210-C-E |
| Regulatory Model | M1845001 |
Video
| Switcher | 2x1 auto-switching or manual, audio-follows-video, Crestron Auto-Locking and QuickSwitch HD |
| Scaler (HDMI Output) | 4K scaler with frame rate conversion, Deep Color, content-adaptive noise reduction, 3:2/2:2 pull-down recovery |
| Input Signal Types | Input 1: HDMI with Deep Color and 4K (DVI and Dual-Mode DisplayPort compatible); Input 2: DM Essentials with Deep Color and 4K |
| Output Signal Types | HDMI with Deep Color and 4K (DVI compatible) |
| Copy Protection | HDCP 2.2 |
| Maximum Resolutions | 4096x2160 / 3840x2160 at 24 Hz 4:4:4 30-bit, 30 Hz 4:4:4 24-bit, 30 Hz 4:2:2 36-bit, 60 Hz 4:2:0 24-bit; 2560x1600 and 1080p60 4:4:4 36-bit; custom resolutions up to 300 MHz pixel clock; interlaced sources not supported |
| Scaler Output Resolutions | Auto (EDID preferred), 720p50/60, 1080i25/30, 1080p24/25/30/50/60, 3840x2160 and 4096x2160 at 24/25/30/50/60 Hz |
| DM Essentials Distance | Up to 70 m (230 ft) for resolutions up to 2K; up to 40 m (130 ft) up to 4K, over CAT5e or higher |
Audio
| Input Signal Types | HDMI, DM Essentials (2-channel LPCM) |
| Output Signal Types | HDMI, stereo analog |
| Analog Output | Balanced/unbalanced stereo line level; 4 Vrms balanced, 2 Vrms unbalanced; 200/100 Ω |
| Volume | -80 to +20 dB plus mute, independent mute for HDMI and analog |
| Performance | 20 Hz–20 kHz ±0.5 dB; S/N >95 dB A-weighted; THD+N <0.005% @ 1 kHz |
Communications
| RS-232 | 2-way, up to 115.2k baud, hardware and software handshaking |
| IR | 1-way, up to 60 kHz (IRP2 emitter sold separately) |
| HDMI | HDCP 2.2, EDID, CEC |
| Ethernet | 100/1000 Mbps, auto-negotiating, CIP, DHCP, web browser setup and control |
| DM Essentials | HDCP 2.2, EDID |
Connectors
| HDMI INPUT 1 | 1 x HDMI Type A, female |
| DM INPUT 2 | 1 x RJ-45 shielded, for a DM Essentials transmitter |
| HDMI OUTPUT | 1 x HDMI Type A, female |
| AUDIO L/R | 1 x 5-pin 3.5 mm terminal block |
| Ethernet | 1 x RJ-45, 100BASE-TX/1000BASE-T |
| I/O 1-2 | 2 x Versiport digital input/output or analog input (0-24 VDC digital, 0-10 VDC analog, 250 mA sink) |
| RELAY 1-2 | 2 x normally open isolated relays, 1 A 30 VAC/VDC |
| IR | 1 x 2-pin 3.5 mm terminal block |
| COM | 1 x 5-pin 3.5 mm terminal block, RS-232 |
| Power | 1 x 2.1 x 5.5 mm DC, 24 VDC 1.25 A |
| SERVICE | 1 x USB Type A (factory use only) |
Power & Physical
| Power Pack | PW-2412WU included; 100-240 VAC 50/60 Hz in, 24 VDC 1.25 A out; powers the receiver and the connected transmitter |
| Power Consumption | 9 W typical |
| Heat Dissipation | 30.7 BTU/hr |
| Acoustic Noise | Fanless |
| Operating Environment | 0° to 40° C (32° to 104° F), 10% to 90% RH non-condensing |
| Chassis | Metal, black finish, vented sides, 2 mounting flanges attached |
| Mounting | Surface or rack rail mount |
| Dimensions (H x W x D) | 130 x 268 x 28 mm (5.11 x 10.53 x 1.10 in), width with flanges |
| Weight | 1.05 kg (2.3 lb) |
| Compliance | UL Listed for US and Canada, CE, IC, FCC Part 15 Class B |
Compatibility & Software Support
Ecosystem
| Transmitters | All DM Essentials transmitters except TXU models (one transmitter). Firmware 1.0.5357.12100 or later is required for 4K60 4:4:4 (4KZ) transmitters |
| Wall Plates | HDMI input can connect to optional MP-WP152 or MPI-WP150 Series media presentation wall plates (sold separately) |
| Control Systems | Crestron 3-Series or later; .AV Framework support on MPC3-201 and MPC3-302 Series |
| Cloud Management | XiO Cloud service |
| Cisco Integration | Native integration with Cisco Webex and Touch 10 devices via the Crestron Configuration tool (configuration.crestron.com), no control system programming required |
Power runs over the DM Essentials cable from the receiver to the transmitter; with 4KZ transmitters, power must be connected to the HD-RX-4K-210-C-E only. DM Essentials ports are not compatible with DigitalMedia 8G+, HDBaseT, PoE or PoDM. Use DM-CBL-8G, DM-CBL-ULTRA or CAT5e or higher cable; shielded cable is recommended above 1080p.
Package Contents & Ordering Information
Models
| Configuration | Part number |
| DMPS Essentials 2x1 4K AV switch and receiver | HD-RX-4K-210-C-E |
The page lists the PW-2412WU power pack as included. IRP2 emitter, wall plates and cables are sold separately.
Datasheet & Downloads
| Product page | Crestron HD-RX-4K-210-C-E product page |
| XiO Cloud | Works with XiO Cloud documentation |
Frequently Asked Questions — HD-RX-4K-210-C-E
Which transmitters work with the HD-RX-4K-210-C-E?
All DM Essentials transmitters except TXU models. 4K60 4:4:4 (4KZ) transmitters require receiver firmware 1.0.5357.12100 or later.
What is the maximum cable distance?
Up to 70 m (230 ft) for resolutions up to 2K and 40 m (130 ft) for resolutions up to 4K over CAT5e or higher cable.
Does it power the transmitter?
Yes. The included power pack powers both the receiver and the connected transmitter over the DM Essentials cable; only one power pack should be connected.
Can it control the display without a control system?
Yes. The RS-232 COM port and CEC over HDMI can turn the display on or off automatically without a control system; IR control requires a control system.
Does it work with Cisco Webex rooms?
Yes. Native Cisco API integration lets its inputs appear on a Cisco Touch 10, configured with the Crestron Configuration tool.
