Crestron 1:2 HDMI Distribution Amplifier with 4K60 4:4:4 and HDR Support
Email sales@sourceit.com.sg or use Request for Quotation below and our team will confirm the latest price, availability and lead time.
PRODUCT DESCRIPTION
Crestron 1:2 HDMI Distribution Amplifier with 4K60 4:4:4 and HDR Support - Local Warranty
A simple, high-performance distribution amplifier that splits a single HDMI signal to feed up to two separate displays, switchers or other devices, with full 4K60 4:4:4 and HDR support. No programming or control system is required.
Key Features
- Splits one HDMI source to two outputs
- Handles 4K60 4:4:4 and HDR10 video, 3D and Deep Color
- Compatible with HD 1080p, UHD 4K and DCI 4K sources and displays
- Dolby TrueHD, Dolby Atmos, DTS-HD, DTS:X and uncompressed 7.1 LPCM audio
- Selectable HDCP 2.2, HDCP 1.4 or off, plus EDID management options
- Input and output video presence LEDs; no programming or control system required
- Thin profile under one inch deep; surface, shelf or single rack rail mountable
HD-DA2-4KZ-E Datasheet — Technical Specifications
General
| Product Name | 1:2 HDMI Distribution Amplifier w/4K60 4:4:4 & HDR Support |
| Brand | Crestron |
| Part Numbers | HD-DA2-4KZ-E |
| Operation | Standalone; no programming or control system required |
Video
| Input Signal Type | HDMI with HDR10, Deep Color, 3D and 4K60 4:4:4 (DVI and Dual-Mode DisplayPort compatible) |
| Output Signal Type | HDMI with HDR10, Deep Color, 3D and 4K60 4:4:4 (DVI compatible) |
| Copy Protection | Selectable HDCP 2.2, HDCP 1.4 or disabled (HDCP content blanked when off) |
| Maximum Resolutions | Up to 4096x2160 DCI 4K / 3840x2160 4K UHD: 24 Hz and 30 Hz 4:4:4 36-bit, 60 Hz 4:2:2 36-bit, 60 Hz 4:4:4 24-bit; 2560x1600 and 1080p60 4:4:4 36-bit; 1080i30 |
| Pixel Clock | Other resolutions supported up to 600 MHz |
Audio
| Input / Output | HDMI (input Dual-Mode DisplayPort compatible) |
| Formats | Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels |
Communications
| HDMI | HDCP and EDID (does not pass CEC) |
| EDID Mode | DEFAULT (factory 4K60 4:4:4 non-HDR, 2-ch LPCM, or custom EDID via USB) or COPY 1ST (copies EDID from the device on Output 1) |
| USB | USB 2.0 host for firmware update and custom EDID upload via USB flash drive |
Connectors
| Input | 1 x HDMI Type A, female |
| Outputs | 2 x HDMI Type A, female |
| Service | 1 x USB Type A, female |
| Power | 1 x 2.1 x 5.5 mm DC connector, 24 VDC 0.75 A |
Controls & Indicators
| Switches | 3-position HDCP switch (OFF/1.4/2.2), 2-position EDID switch (DEFAULT/COPY 1ST) |
| Buttons | SETUP (restore factory settings), recessed RESET |
| LEDs | Power (bi-colour), input signal presence, 2 output transmission LEDs |
Power, Environmental & Physical
| Power Pack | PW-2407WU included; input 100-240 VAC 50/60 Hz, output 0.75 A @ 24 VDC |
| Power Consumption | 4.3 W typical |
| Operating Temperature | 0° to 40° C (32° to 104° F) |
| Humidity | 10% to 90% RH (non-condensing) |
| Chassis | Metal, black finish, 2 integral mounting flanges |
| Mounting | Freestanding, surface mount, or single rack rail |
| Dimensions (H x W x D) | 22 x 146 x 119 mm |
| Compliance | CE, IC, FCC Part 15 Class B |
Compatibility & Software Support
Ecosystem
| Control | Standalone operation; no programming or control system required |
| Sources & Displays | HD 1080p, UHD 4K and DCI 4K; DVI and Dual-Mode DisplayPort sources via adapter |
| Firmware / EDID | Updates and custom EDID upload via USB flash drive on the service port |
| Family | Other models: HD-DA4-4KZ-E (1:4) and HD-DA8-4KZ-E (1:8) |
4K60 4:4:4 and HDR support requires HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps; 10.2 Gbps cables may be used if 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable. DVI or Dual-Mode DisplayPort sources need an appropriate adapter or interface cable (CBL-HD-DVI, sold separately).
Package Contents & Ordering Information
Included (per Crestron specifications)
- PW-2407WU 100-240 VAC universal power pack
Models
| Configuration | Part number |
| 1:2 HDMI distribution amplifier | HD-DA2-4KZ-E |
Optional: CBL-HD-DVI interface cables (sold separately).
Datasheet & Downloads
| Product page | Crestron HD-DA2-4KZ-E product page |
Frequently Asked Questions — HD-DA2-4KZ-E
How many displays can the HD-DA2-4KZ-E feed?
It splits one HDMI input to two HDMI outputs, feeding up to two displays, switchers or other devices.
Does it support 4K60 4:4:4 and HDR?
Yes. It handles 4K60 4:4:4 and HDR10 video. Crestron specifies HDMI cables and couplers rated for at least 18 Gbps TMDS bandwidth for 4K60 4:4:4 and HDR.
Does it need a control system or programming?
No. It is a standalone device; HDCP and EDID modes are set with switches on the unit.
How is EDID handled?
In DEFAULT mode it uses the factory 4K60 4:4:4 non-HDR EDID (or a custom EDID uploaded by USB). In COPY 1ST mode it copies and stores the EDID of the device connected to Output 1.
Does it pass CEC?
No. Crestron states the HDMI ports support HDCP and EDID but do not pass CEC.
