Crestron DM NAX Audio-over-IP 1-Gang Wall Plate with 2 XLR Inputs, Black
Email sales@sourceit.com.sg or use Request for Quotation below and our team will confirm the latest price, availability and lead time.
PRODUCT DESCRIPTION
Crestron DM NAX Audio-over-IP 1-Gang Wall Plate with 2 XLR Inputs, Black - Local Warranty
A single-gang wall plate that brings two XLR microphone or line inputs onto a DM NAX audio-over-IP network, powered over Ethernet, with a rear line-level output for feeding a Crestron media wall plate. Built on AES67 and compatible with DM NVX and Dante.
Key Features
- Two XLR inputs, each configurable for line or microphone level
- +48V phantom power per input for condenser microphones
- Rear 5-pin balanced line-level stereo output
- DSP with 5-band EQ per XLR input and level control via web interface
- Works as both AoIP encoder and decoder (DM NAX, AES67, Dante compatible)
- PoE powered; mounts in a U.S. 1-gang electrical box or on a rack rail
- Configuration via web interface, SIMPL Windows, C# or RESTful API
DM-NAX-2XLRI-1G Datasheet — Technical Specifications
General
| Product Name | DM NAX Audio-over-IP Wall Plate with XLR, Black, 1-Gang |
| Brand | Crestron |
| Part Numbers | DM-NAX-2XLRI-1G |
| Function | Audio-over-IP encoder and decoder wall plate |
Audio
| Input Signal Types | Balanced/unbalanced analog line or mic level; DM NAX/AES67 audio-over-IP |
| Output Signal Types | Balanced/unbalanced analog line level; DM NAX/AES67 audio-over-IP |
| Source Compensation | ±10.0 dB per input; source signal detect |
| Frequency Response | Mic-level input: 20 Hz–20 kHz ±1.0 dB; line-level input: 20 Hz–20 kHz +0.1/-1.0 dB |
| THD+N | Mic-level: 0.3% @ 1 kHz; line-level: 0.005% @ 1 kHz |
| S/N Ratio | 105 dB from analog input; 111 dB from digital input (A-weighted) |
| EQ | EQ, high pass, low pass, treble shelf, bass shelf, notch; 10 Hz–20 kHz; +20/-40 dB; 0.1–4.0 octaves |
Connectors
| INPUTS 1–2 | 2 balanced XLR; mic gain up to 60 dB; line level up to +21 dBu; impedance >10 kΩ; +48V phantom power in mic mode |
| OUTPUT L-R | 1 x 5-pin 3.5 mm terminal block, balanced line-level; max +14.7 dBu; 200 Ω |
| ETHERNET PoE | 1 x RJ-45 100BASE-TX/1000BASE-T |
| Other | Chassis ground lug; SETUP button and LED for factory reset |
Power & Physical
| PoE | IEEE 802.3af Class 0 (12.95 W) compliant |
| Power Consumption | 2.9 W |
| Operating Temperature | 0° to 35° C, 10% to 95% RH non-condensing |
| Chassis | Metal, black and silver finish, vented sides |
| Mounting | 1-gang U.S. electrical box or plaster ring (not included), 89 mm box depth recommended; or rack rail |
| Dimensions (H x W x D) | 105 x 44 x 55 mm (4.12 x 1.72 x 2.14 in) |
| Weight | 170 g (6 oz) |
| Compliance | IC, FCC Part 15 Class B |
Compatibility & Software Support
Ecosystem
| DM NAX System | A single DM NAX system handles distribution between 32 DM NAX devices and up to 256 audio output zones |
| DM NVX | Compatible through the DM NVX AES67 secondary audio stream |
| Third-party | AES67 solutions; Dante via compatibility mode enabled through Dante Controller |
| Media Wall Plates | Line output feeds MP-WP-2XLRO-1G and MP-WP-2RCAO-1G media wall plates |
| Configuration | Web interface, SIMPL Windows, C#, RESTful API; XiO Cloud supported product |
Package Contents & Ordering Information
Models
| Configuration | Part number |
| 1-gang DM NAX wall plate, 2 x XLR inputs, black | DM-NAX-2XLRI-1G |
Requires a PoE (IEEE 802.3af) network switch or PSE. Electrical box or plaster ring not included.
Datasheet & Downloads
| Product page | Crestron DM-NAX-2XLRI-1G product page |
| XiO Cloud | XiO Cloud supported products |
Frequently Asked Questions — DM-NAX-2XLRI-1G
Can the DM-NAX-2XLRI-1G power condenser microphones?
Yes. Each XLR input can supply +48V phantom power when configured for microphone level.
How is it powered?
By PoE from an IEEE 802.3af compliant Ethernet switch or third-party PSE; it draws 2.9 W.
Does it work with Dante?
Yes, via AES67 using the compatibility mode enabled through Dante Controller.
Can it output audio locally as well?
Yes. It operates as both encoder and decoder, so it can receive AoIP streams and output them on the rear line-level output, for example to an MP-WP-2XLRO-1G or MP-WP-2RCAO-1G media wall plate.
What DSP is available?
A 5-band EQ per XLR input and level control of all inputs and outputs, configured through the web interface.
